1 / 17
Gammy's remix of elinanz's Easter egg — zdjęcie 1
1 / 17

Gammy's remix of elinanz's Easter egg

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Gammy's remix of elinanz's Easter egg chick-bunny Easter decoration. This version print-friendly. Improvements: The…

Ocena
0 / 5
Polubienia
2
Pobrania
9
Wydruki
0
Wyświetlenia
115
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Gammy's remix of elinanz's Easter egg chick-bunny Easter decoration.

This version print-friendly.

Improvements:

  • The model has been split into three individual parts for easy printing
  • The nose geometry has been modified to make the model manifold

(properly connected to and a part of the body)

  • The underside of the feet have been flattened
  • The legs have been thickened, and an insert portion has been added, to slot

into the bottom portion of the model

  • The bottom portion now has two holes to insert the feet into

Notes:

  • The bottom part holes, where the feet are to be inserted, have been

constraint-adjusted to fit. There should be no need to scale them further.

  • Blender and STL files are included, as well as elinanz' original stl.
  • I used Tamiya Cement to attach the bottom and top portions. I needed no

adhesive or solvent to attach the legs; they're firm-fit

  • I suggest painting this model, especially to hide the top/bottom seam
  • Successfully printed using
    • Part 1 (Legs)
      • HIPS (240C, 110C hotbed)
      • 1.0mm walls ("perimeter")
      • 0.15mm layer height
      • 10% infill
      • No supports
    • Part 2 (Bottom)
      • HIPS (240C, 110C hotbed)
      • 1.0mm walls ("perimeter")
      • 0.2mm layer height
      • 10% infill
      • Supports touching buildplate (for the tail)
    • Part 3 (Top)
      • HIPS (240C, 110C hotbed)
      • 1.0mm walls ("perimeter")
      • 0.2mm layer height
      • 10% infill
      • Supports everywhere (for the right ear)

Print Settings

Printer Brand:

LulzBot

Printer:

Mini

Rafts:

No

Supports:

Yes

Resolution:

0.15mm for legs, 0.2mm for top/bottom

Infill:

10%

Notes:

  • Successfully printed using
    • Part 1 (Legs)
      • HIPS (240C, 110C hotbed)
      • 1.0mm walls ("perimeter")
      • 0.15mm layer height
      • 10% infill
      • No supports
    • Part 2 (Bottom)
      • HIPS (240C, 110C hotbed)
      • 1.0mm walls ("perimeter")
      • 0.2mm layer height
      • 10% infill
      • Supports touching buildplate (for the tail)
    • Part 3 (Top)
      • HIPS (240C, 110C hotbed)
      • 1.0mm walls ("perimeter")
      • 0.2mm layer height
      • 10% infill
      • Supports everywhere (for the right ear)

Post-Printing

Notes

I used Tamiya Cement to attach the bottom and top portions. I needed no adhesive or solvent to attach the legs; they're firm-fit. I suggest painting this model, especially to hide the top/bottom seam.

Category: Decor

Tagi