Gammy's remix of elinanz's Easter egg
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gammy's remix of elinanz's Easter egg chick-bunny Easter decoration. This version print-friendly. Improvements: The…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 115
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Gammy's remix of elinanz's Easter egg chick-bunny Easter decoration.
This version print-friendly.
Improvements:
- The model has been split into three individual parts for easy printing
- The nose geometry has been modified to make the model manifold
(properly connected to and a part of the body)
- The underside of the feet have been flattened
- The legs have been thickened, and an insert portion has been added, to slot
into the bottom portion of the model
- The bottom portion now has two holes to insert the feet into
Notes:
- The bottom part holes, where the feet are to be inserted, have been
constraint-adjusted to fit. There should be no need to scale them further.
- Blender and STL files are included, as well as elinanz' original stl.
- I used Tamiya Cement to attach the bottom and top portions. I needed no
adhesive or solvent to attach the legs; they're firm-fit
- I suggest painting this model, especially to hide the top/bottom seam
- Successfully printed using
- Part 1 (Legs)
- HIPS (240C, 110C hotbed)
- 1.0mm walls ("perimeter")
- 0.15mm layer height
- 10% infill
- No supports
- Part 2 (Bottom)
- HIPS (240C, 110C hotbed)
- 1.0mm walls ("perimeter")
- 0.2mm layer height
- 10% infill
- Supports touching buildplate (for the tail)
- Part 3 (Top)
- HIPS (240C, 110C hotbed)
- 1.0mm walls ("perimeter")
- 0.2mm layer height
- 10% infill
- Supports everywhere (for the right ear)
- Part 1 (Legs)
Print Settings
Printer Brand:
LulzBot
Printer:
Mini
Rafts:
No
Supports:
Yes
Resolution:
0.15mm for legs, 0.2mm for top/bottom
Infill:
10%
Notes:
- Successfully printed using
- Part 1 (Legs)
- HIPS (240C, 110C hotbed)
- 1.0mm walls ("perimeter")
- 0.15mm layer height
- 10% infill
- No supports
- Part 2 (Bottom)
- HIPS (240C, 110C hotbed)
- 1.0mm walls ("perimeter")
- 0.2mm layer height
- 10% infill
- Supports touching buildplate (for the tail)
- Part 3 (Top)
- HIPS (240C, 110C hotbed)
- 1.0mm walls ("perimeter")
- 0.2mm layer height
- 10% infill
- Supports everywhere (for the right ear)
- Part 1 (Legs)
Post-Printing
Notes
I used Tamiya Cement to attach the bottom and top portions. I needed no adhesive or solvent to attach the legs; they're firm-fit. I suggest painting this model, especially to hide the top/bottom seam.
Category: Decor