Vanagon Westfalia Fridge Vent Power Sockets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement interior fridge vent for a VW Vanagon Westfalia, with two 12V power socket mounts. The 45 degree…
- Ocena
- 4 / 5
- Polubienia
- 11
- Pobrania
- 86
- Wydruki
- 1
- Wyświetlenia
- 791
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a replacement interior fridge vent for a VW Vanagon Westfalia, with two 12V power socket mounts.
The 45 degree sockets are necessary if you have something other than a stock fridge, since the aftermarket fridges take up significantly more space in the cabinet. . I have a Vitrofigo VF45, but these will work with a TruckFridge TF45.
MIGHT work with a TF65, but I don't have one to test.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Supports:
No
Filament:
PLA will work for a while, but will eventually warp due to heat inside the van.
Ideally print in at least PET-G. I reprinted this in ABS and it's holding up great.
Notes:
Finished with Rustoleum Chestnut spray paint, which is a very close match to a Westfalia brown trim.
Post-Printing =============
Category: Automotive