Vanagon Westfalia Fridge Vent Power Sockets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement interior fridge vent for a VW Vanagon Westfalia, with two 12V power socket mounts. The 45 degree…
- Rating
- 4 / 5
- Likes
- 11
- Downloads
- 86
- Makes
- 1
- Views
- 796
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This is a replacement interior fridge vent for a VW Vanagon Westfalia, with two 12V power socket mounts.
The 45 degree sockets are necessary if you have something other than a stock fridge, since the aftermarket fridges take up significantly more space in the cabinet. . I have a Vitrofigo VF45, but these will work with a TruckFridge TF45.
MIGHT work with a TF65, but I don't have one to test.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Supports:
No
Filament:
PLA will work for a while, but will eventually warp due to heat inside the van.
Ideally print in at least PET-G. I reprinted this in ABS and it's holding up great.
Notes:
Finished with Rustoleum Chestnut spray paint, which is a very close match to a Westfalia brown trim.
Post-Printing =============
Category: Automotive