1 / 5
Ender 3 S1 Pro to 12864 LCD Bracket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket to attach a 12864 LCD to replace the touch screen included with the printer.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 105
- Wydruki
- 2
- Wyświetlenia
- 1292
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 7)Remiksy (0)Kolekcje (18)Powiązane
This is a bracket to attach a 12864 LCD to replace the touch screen included with the printer. It will use the existing screws that hold the original bracket to the printer. You will need two M5*8 screws (like on the original Ender 3) to attached the LCD to the bracket. Those screws will cut their own threads in the bracket to hold the LCD.
*You may need to run a drill bit in the holes after printing depending on your printer.