MakerBeam Based PCB Stencil Jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- BSD License
This is a compact (150x200x28mm) jig for using PCB stencils to apply solder paste, or transparency sheets for applying a soldermask.
It is not a full 4-axis machine created for high-volume production, but will handle skew, twist, and translation in x-y planes if you've patient and careful. If you're making your own PCBs for prototypes at home, you shouldn't have any issue with that. :-D
I have an ANT style mini CNC mill, and I made a wooden cabinet for it with a UV curing station. I guessed at how much space I needed for UV curing before I had a jig, or had even designed this one. Needless to say, I only had 28mm of heigh to work with because in my mind that was enough room when I was building the cabinet.
With that in mind, the primary design constraint here was that this needed to fit into a 28mm opening, needed to use MakerBeam extrusions (because I had a few on hand) and common parts you may have as well, or will be inexpensive for you to obtain.
You'll need:
- M3 threaded rods. I picked up a few that were 300mm long, and only needed two.
- M3 Tap.
- 6mm Aluminum Rods.
- A bunch of M3 hardware.
- 6x 150mm MakerBeams
- 4x 200mm MakerBeams