16x16 motor skids for 5" quadcopters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are some cool looking landing skids for 5" motors, with a 16x16 base and M3 screws.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 172
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
These are some cool looking landing skids for 5" motors, with a 16x16 base and M3 screws.
They're just big enough to accomodate the screws and be sturdy, in order to fit a large variety of frames and not waste filament.
I printed them in PETG as it's a bit tougher, PLA should work too. Let me know if you try using it!
They're 6 or 7mm tall, depending on how low your frame is. The ones in the picture are the 6mm version.
You're gonna need screws that are 1mm longer to fit them well.
print at 100% to let them work even when they inevitably wear off a bit.