Polar Drawbot for Makelangelo with batteries as counterweight
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of few parts I needed to build my drawbot
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 897
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is a remix of few parts I needed to build my drawbot with https://github.com/MarginallyClever/Makelangelo-software and Marlin 2.0.9+ firmware.
It uses LR 20 batteries as counter weight.
I used all the parts from https://www.thingiverse.com/thing:3169670 as a support mount for the stepper and printed endstop-left.stl and endstop-right.stl to fix the endstop just below the steppers.
All the part of the pen holder, aka the gondola, are taken from https://www.thingiverse.com/thing:2494228 in combination with counterweight-4.stl
Update feb 16: I have added a new version of the stepper mount with support for endstop. The right and the left have to be printed.
Here a full build log on my website (in french) : https://www.mydiy.dev/realisations_drawbot.html
Category: Robotics