1 / 3
Filastruder clip-in wall mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
A wall mount for the filastruder that holds it securely and makes it easy to remove for maintenance.
Uses the 4 existing bolts that run through the enclosure panels. It is very important that you use 8 metal washers to prevent the bolts from pulling through the panels. Nylock nuts or blue loctite on the ends of the bolts would also be a good idea to avoid them vibrating loose during operation.
With gratitude to vertigo235 for the unpublished TV mount this was based on.
Category: 3D Printer Accessories