Liczymy pasujące modele…
In my experiments with reclaiming waste prints on my wall mounted filastruder I found that the shredded material could quite easily get hung up in the chute, and I was constantly having to bang on it to keep the extruder screw fed with…
This isn't really a remix, but I wanted a link back to the thing this was designed for. Rather than have all the weight of the Filastruder Fume Extraction Enclosure hanging on the Filastruder itself, reliant on the friction between the…
ALERT! This auger can be used with any version of the Auger Assisted Vertical Hopper (see Remix Source) parts, however, if you plan to use this auger, and have not already printed other hopper parts, printing the included bushing and…
First off, I've uploaded both STEP and Fusion 360 files, so you can jump in and delete features you don't need, or made adjustments for your chosen hardware, or add to it. I'd LOVE to see some remixes posted, because I'm SURE that I did…
So I got in early on the http://filastruder.com kickstarter and I got the kit because I didn't want to wait for the milled case. This is my version that is intended to be cut from 1/4 plywood. It way stronger than it needs to be and has…
A wall mount for the filastruder that holds it securely and makes it easy to remove for maintenance. Uses the 4 existing bolts that run through the enclosure panels. It is very important that you use 8 metal washers to prevent the bolts…
Having already pulled all the electronics out of the Filastruder case, I figured, why not remove the empty shell, too? Well, I still needed a way to hold the motor cooling fan in place, and the case screws are needed for the wall mount…
changed it so that a mini servo such as tower pro (SG90) can fit, small bit of filling needs doing as about 0.5 mm to wide, also i used an Arduino sketch with this which operates this at slow speed. Remember to download the…
In an attempt to increase cooling to help control the diameter of the extruded filament better, I remixed the main chamber of the Fume Extraction Enclosure to have two of the fan mounts that bring the fan closer to the center of the…
I needed to mount my Filastruder Vertically and didn't want to drill some holes in it and mount it to a board. 1) This bracket is mounted to the backboard by 2x 4mm screws. 2) The Filastruder is clipped in using using the rear motor…
Since I bought the Filastruder mainly to reclaim scrap ABS, and since heating ABS produces toxic fumes, I designed this enclosure to trap those fumes so that they may be vented out of the window. This system relies on 4" galvanized…
I created this hopper for the filastruder V2, as i was having too many problems using it vertically that i reconfigured for horizontal operation. The Hopper extension and lid I drew up in Fusion 360, and used the window idea from thingi…
If you mount a Filastruder on a wall, the motor control board may become hard to see and use. This is a simple bracket that allow to mount it at a right angle, so it can be read easily in this situation. It replaces the plastic part that…
I redesign the chute used on the Vertical hopper so it can be used on the Version 2.0 filastruder. Plus I also design a vibration mechanism for the chute to solve feed issues, the vibrator is a little too powerful so I need to seal the…
this is to enable dual 60mm fans on a filastruder, one each side. Category: 3D Printer Extruders
Remixed this design to add bottle thread (PC1881 thread, most common thread for 2L soda bottles in Canada) Category: 3D Printer Accessories
A fusion (and remix) of the original Filastruder acrylic panels and MrFlippant's electronics box. This keeps everything inside as one unit but keeps it away from the metallic moving parts where you don't want wires and connections in…
UPDATE: VERSION 1.3!!! I rounded over the back and made hanging slots so it's easier to take on and off the wall. I also added some more washers if you need them and I've put 4 holes on the top plate that can be used with standard 3" or…
I remixed this as the original one was designed for the first version of the filastruder, I redesigned it for version 2 plus i put a longer arm on it, to keep the fan at least 25mm from the nozzle as if it is too close, it causes the…
In spite of my best attempts to tighten the pipe and flange connection prior to using the Filastruder, it managed to tighten itself further when it was in use. When it finally stopped, it was 45 degrees off to one side. My only solution…
Motor mount for the Filawinder geared motor modified to use trapped square nuts rather than heat-set inserts. Category: 3D Printer Accessories
Very simple stand for the Filastruder case. If you don't have access to a laser cutter let me know and we can work something out. Category: 3D Printer Extruders
It fits particularly on Filastruder 2.0, fully engaging at the frontal guide. This is the second version of the Filastruder filament guide. Now you can move and regulate the guide with 5 degrees of freedom. The guide STL has 2 little…
Doubles the height of the rectangular Filastruder hopper Category: 3D Printer Extruders
The official Filastruder V2 laser cut case does not come with a rear cover, leaving the stall protection board exposed. This cover encloses the stall protection board and its electrical connections while maintaining access to the LCD and…
This is my last update. I decide to substitute the PTFE tube with a couple of ball bearings to minimize the friction. You can add also the same arm of the filament guide 2 ( http://www.thingiverse.com/thing:1414397 ) The ball bearing are…
This little accessory fills in the hole under the nozzle. The purpose is to allow the filament to go down vertically without friction avoiding to stop in the corners of the laser cut wood plate. After you print it, you have to take a…
