NutCase - 12.2L ITX PC Case

Using steel rod along each of the lateral beams and thicker panels, this case is sturdy enough to face the challenges of components like an AIO or larger air cooler.

Magnetic panels, unique designs, front USB and print-in-place hinges. All this and more in one simple case.

A full manual (with pictures) is available here or in the downloads indicating which non-printed components you will need to buy, the parts to print and using what settings, and how to assemble the parts and case. Please refer to this if you are interested! If I missed something that you think needs to be added to the manual, just let me know.

Size

• 334mm x 164mm x 222mm (12.16L)

Motherboard

• ITX only

Power Supply

• SFX Only
• SFX-L may work with custom cables or if you really squish them (untested)

Graphics Card

• 2.2 slot maximum width (e.g. EVGA 3080XC)
• 310mm max length
• 120mm max height (higher with low profile power connectors)

Processor

• 120mm/240mm AIO
• 130mm Air Cooler

Case Fans

• 2x 120mm (instead of 240mm AIO)
  • Lowers CPU Air Cooler Height by 25mm
• 1x 92mm in rear
• No bottom fans due to printer size restrictions

2.5" Drives (SSD)

• 2x attached to front panel

Brief list of extra hardware, amounts and more specifics in manual.

• Power Supply Cable Extension
• M3 Nuts and Bolts
• 8x3mm Round Magnets
• 16mm Power Switch
• 3/16" Diameter Steel Rod 
• USB 3.0 Front Panel Extension

The only tools you will need are a way to cut the steel rod to size and superglue for the magnets. And a 3D printer of course.

I design these for myself but love to share them with the community. If you appreciate this work, consider donating to me via the coin below the download button. Thanks!