1 / 1
2.5" Dust Collection - for Makita Random Orbital Sander (ROS) — zdjęcie 1

2.5" Dust Collection - for Makita Random Orbital Sander (ROS)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Attachment for Makita BO5041 Random Orbital Sander for connection to 2.5" dust collection fittings.

Ocena
0 / 5
Polubienia
8
Pobrania
55
Wydruki
0
Wyświetlenia
542
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

Fitting designed for Makita BO5041 5" Random Orbital Sander, but should work on any ROS with an output port OD of 7/8". You will also need a nylon lock nut and hardware to clamp the fitting to the tool. Recommend adding some thin craft foam or sandpaper to the interior of the connection to the ROS to get a better grip on the tool and prevent it from pulling off. 

Print 2.5" fitting face down, with supports inside. Recommend PET-G or ABS. 

Tagi