1 / 1
2.5" Dust Collection - for Makita Random Orbital Sander (ROS)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attachment for Makita BO5041 Random Orbital Sander for connection to 2.5" dust collection fittings.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 55
- Makes
- 0
- Views
- 544
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Fitting designed for Makita BO5041 5" Random Orbital Sander, but should work on any ROS with an output port OD of 7/8". You will also need a nylon lock nut and hardware to clamp the fitting to the tool. Recommend adding some thin craft foam or sandpaper to the interior of the connection to the ROS to get a better grip on the tool and prevent it from pulling off.
Print 2.5" fitting face down, with supports inside. Recommend PET-G or ABS.