Head mount for Armytek Wizard with rubber ring (+other 18650 lights)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix from @Citruspers with slots for a rubber ring, stronger conception, clearance between headlamp and headband...etc.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 182
- Wydruki
- 2
- Wyświetlenia
- 1052
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Instructions
PETG or water resistant material recommended.
Print in place on the flat side, with 100% infill, no supports needed:
- Headlamp_holder_with_rubber_ring v1 (stl or 3mf) is recommended and the most versatile
- or
- Headlamp_holder_with_rubber_ring_closed v1 (stl or 3mf) as stronger alternative if you do not need open side for the headband
Enhancements
Major enhancements
| Function | Description | |
|---|---|---|
| 1 | Stronger conception | Thickness increased to 3mm |
| 2 | Allowing headband clearance | “Arms” raise by 2mm, so the headlamp does not block the headband |
| 3 | Rubber ring slots | One side designed to always keep attached the rubber ring, the other one is designed for a relatively quick release (see gif) Designed for the original o-ring (3 mm width, 25mm interior diameter) but anything similar should work, rubber band for exemple. |
| 4* | Allowing mounting for sewn headband | Cuts are made on each side to allow mounting any closed headband like the original Armytek one I had which made a loop on each side. * I made a file without the cuts for better strength if needed : "Headlamp_holder_with_rubber_ring_closed" (stl and 3mf). |
Minor enhancements
- Wider parts for strength
- Fillets for best strength results with printing process.
Design
I remixed the original fusion 360 file from Citruspers (Headlamp_holder_v14.f3d), the new project file is attached (Headlamp_holder_with_rubber_ring v1).
Revision history
| Date | Version | Description |
| 31/07/2022 | V1.0 | Creation |
| 20/08/2022 | V1.0 | Adding details in the description |