1 / 1
Fujifilm X-Mount to 1.25" Telescope Adapter — zdjęcie 1

Fujifilm X-Mount to 1.25" Telescope Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple mount to attach Fujifilm mirrorless cameras to a telescope that accepts 1.25" eyepieces.

Ocena
0 / 5
Polubienia
21
Pobrania
215
Wydruki
1
Wyświetlenia
1160
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is a simple adapter to allow you to attach your Fujifilm mirrorless camera directly to your telescope with a 1.25" eyepiece.

Printing it slower to ensure accuracy is probably best. The locking pin does work. It's a snug fit and so far has worked well in place of a typical metal T-mount adapter. You'll want to use this with a smooth PEI sheet to prevent the pogo-pins from catching on a rough surface and potentially being damaged. Make sure you get a very good first layer. Print with the X-mount interface down ("upside down") and supports only on the print bed.

The “FX Base.3mf” was borrowed from this model.

Tagi