1 / 2
Raspberry Pi Mountable Frame
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A frame to mount your Raspberry Pi 4.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 347
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
I made this model about a year ago but never posted it. I had a case that would allow me to mount my Octoprint instance on the bottom of my Lack Enclosure but it did not allow for a fan or PoE hat. I took inspiration from Raspberry Pi 4 1U rack-mount bracket over on Thingi.
There are a couple of issues that I might fix if there is enough demand:
- I did not think about the MicroSD card sticking out the back end until I actually printed it out. I added a notch in the back to account for the SD card.
- In adding the notch for the SD card, the sled can now get pushed farther back which partially blocks the USB C port. If you are using a PoE hat to power the pi, this is not a problem. Otherwise, you might not be able to push the sled in all the way.
- One of the MicroHDMI ports is blocked.
- The sled has a small tolerance. You may have to slide it in and out a few times for it to slide easily.
Overall, I am happy with the model for my needs.