Altoids Insert with SD slots, now with magnet insets!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This as another Altoids insert that has 2 slots for SD cards and insets for small 12mmX3mm Magnets.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 403
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
This as another Altoid insert that has 2 slots for SD cards and insets for small 12mmX3mm Magnets. The insets are a bit oversized to give room for glue and magnet size variance.
No supports necessary. I printed my models at layer height: 1st layer .2mm and all others .3mm
The magnets I used were from Amazon: “40pcs Magnets Disc Countersunk Permanent Magnet Fastener Magnets 12mm D Disc Countersunk Pe12mmX3mm,Magnets With Holes,Countersunk Hole 4mm (Disc:12x3-4mm)”
I used a small bit of JB-Weld to glue the magnets to the divider.
The Gcode file has variable layer height to give the best resolution for the finger relief for the SD card slots.
Happy Printing!
You can help
To help cover the expenses of printing prototypes for the models I share, please consider a donation by purchasing an item from my Amazon wishlist here