TK1 telegraph key base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple base for a TK1 Soviet telegraph key. Although it doesn't really provide enough weight for efficient…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 273
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a simple base for a TK1 Soviet telegraph key. Although it doesn't really provide enough weight for efficient use of the key, it is compact and portable. The base is attached with four M3×16mm nut/screw pairs.
Two versions are provided. One requires supports, the other uses a sacrificial layer above the nut hole that you can drill out after printing or simply push out with the end of a screw (I found it's slightly cleaner to push from the nut side, opposite of the final orientation of the screw as installed).
Print Settings
Printer:
Prusa MINI+
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament:
Overture PETG
Black
Notes:
3 perimeters
Category: Electronics