TK1 telegraph key base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple base for a TK1 Soviet telegraph key. Although it doesn't really provide enough weight for efficient…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 20
- Makes
- 0
- Views
- 273
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a simple base for a TK1 Soviet telegraph key. Although it doesn't really provide enough weight for efficient use of the key, it is compact and portable. The base is attached with four M3×16mm nut/screw pairs.
Two versions are provided. One requires supports, the other uses a sacrificial layer above the nut hole that you can drill out after printing or simply push out with the end of a screw (I found it's slightly cleaner to push from the nut side, opposite of the final orientation of the screw as installed).
Print Settings
Printer:
Prusa MINI+
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament:
Overture PETG
Black
Notes:
3 perimeters
Category: Electronics