1 / 3
Center finder for 1x4 or 2x4 with 608 bearings
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mark the center of a nx4 board with smooth rolling bearings
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 85
- Wydruki
- 0
- Wyświetlenia
- 709
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (27)Powiązane
Bearings should press fit but a small amount of super glue can be added to posts before adding the bearings if tolerances are off.
Printed at 0.3mm layer height with a 0.6mm nozzle in Overture gray blue PLA.