1 / 1
Metal Utility Shelves Floor Guards
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protect your floor with boots for metal utility shelves with 1.25" x 1.25" feet profiles that are 3/32" thick.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 229
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
I wanted replacement/aftermarket parts for my adjustable metal utility rack shelving units. My shelves possessed feet that were L-shaped 1.25" x 1.25" at 9/32" thick.
I designed the print to allow for some tight tolerances so the boots would not fall off of the shelving if I was moving them, and so that they were easily printable.
- ~0.2 mm added on each side of the linear dimensions
- walls were a multiple of the nozzle diameter I used to print the parts. 3 X 0.4 mm = 1.2 mm.