Filament Spool Holder Connector for IKEA SKÅDIS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an addition to the original design to improve its sturdiness by connection both parts.
- Ocena
- 5 / 5
- Polubienia
- 106
- Pobrania
- 498
- Wydruki
- 14
- Wyświetlenia
- 2861
- Oceny
- 13
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I really like alecs.form's Filament Spool Holders for IKEA SKÅDIS. I made a small add-on to give the holder more rigidity, so that both parts don't bend outwards when placing a spool. It consists of two parts, an outer connector that is slid between both sides of the holder and an inner connector that connects the three parts together. As the holders have 2 openings you need both connectors twice per spool. You can secure them with some super glue if needed. The design is a remix of dmuva's Spool Holder IKEA Skadis extension.
There are three variants, for different spool widths. If you need a larger version, increase the length with a multiple of 20mm for both connectors. First print out a trial version to check if the inner connector can be slid tightly into the outer, adjust the dimensions of the inner in the Slicer if necessary. On my Original Prusa i3 MK3S+ they came out fine, I could print them without an extra brim.