Simple Flash Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A printable flash stand with a hot/cold shoe mount for your Flash.
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 562
- Wydruki
- 5
- Wyświetlenia
- 1555
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
A printable flash stand/foot with a hot shoe mount. Also incorporates a hole to accommodate the locking pin on Nikon and Canon flash units.
A friend of mine that on the train realized that he had forgotten his flash stand asked if I had one he could borrow, which I didn't, but I designed and printed him one instead before he had managed to arrive in Stockholm to pick it up :-)
Prints perfectly without support if your printer bridges reasonably well, print top-side down to get the hot-shoe mount as clean as possible.
Three versions included:
- Printed thread (added a printed 1/4-20" tripod thread, works great!)
- Hexnut (added a recess for inserting a 1/4-20" hex nut)
- Plain (just a plain stand without a tripod mount)
I printed this with a 1.2mm perimeter, top and bottom, and 30% infill.
I used a 2,5mm drill to clean up the locking hole.
Photo by Björn Larsson, www.bjornlarsson.se
First published in 2016 over at YouMagine