The ultimate vacuum robot barrier for drying racks! STOP THE ROBOT!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A minimalistic and easy to print barrier for your vacuum robot! Stops the robot for moving above the drying rack pipe!
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 731
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Because my vacuum robot likes to move above the drying rack's pipe, I made a simple and cheap barrier with carton for faster cleaning cycles. But that was a ugly solution.
So now I've made a nice solution with using my printer. It's a clipping solution. The use of tools isn't needet.
I've made it for a pipe diameter of 16,5 mm. Works really well with PETG. PLA should work as well.
My recommendation is to print it completely solid or using the gcode files for Prusament PETG and a 0.6 nozzle diameter. I've add the .3mf files for having the right and supportless oriantations for making your own profiles! A 0.4 or 0.3 layer heigh works! Please share it if you have a well solution!
The pipe distances are 470 mm and 515 mm, as you can see on the pictures. If you have another distance, you can easy modify the middle parts by scaling the length in your favorite slicer.
Tell me, if there are other pipe diameters in the drying rack's universe! Then I will add some versions of the clipping wall.
If you like it, please show me your make! You can support me by liking and downloading the models!