Raspberry Pi Pico PicoProbe Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enclosure for Raspberry Pi PicoProbe using DB9 output connector.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 649
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v3.0
When I started working with the Raspberry Pi Pico, I wanted to make a PicoProbe for easier code debugging. I came across an excellent case for the PicoProbe that was designed by Alan Reed. His site contains a great writeup of the design of the case and of the PicoProbe in general. However, I wanted to use parts I had on hand, so I modified Alan's design (with his permission) as follows:
- Added a restart switch to restart the PicoProbe when it hangs or when updating its software.
- Enlarged the light pipe diameter to suit what I had on hand.
- Replaced the JST output connectors with a single DB-9 connector.
- Enlarged the Raspberry Pi logo and made it cut completely through the lid for better ventilation.
- Replaced Alan's name with a larger PicoProbe label (sorry Alan).
- Reworked the button pusher to not need print support.
Note that the SCAD file requires the use of the OpenScad D-Sub Library that can be found HERE.
I printed all of the parts at 0.2mm with 20% infill and no support.