Raspberry Pi Pico PicoProbe Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Enclosure for Raspberry Pi PicoProbe using DB9 output connector.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 25
- Makes
- 0
- Views
- 649
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- GNU General Public License v3.0
When I started working with the Raspberry Pi Pico, I wanted to make a PicoProbe for easier code debugging. I came across an excellent case for the PicoProbe that was designed by Alan Reed. His site contains a great writeup of the design of the case and of the PicoProbe in general. However, I wanted to use parts I had on hand, so I modified Alan's design (with his permission) as follows:
- Added a restart switch to restart the PicoProbe when it hangs or when updating its software.
- Enlarged the light pipe diameter to suit what I had on hand.
- Replaced the JST output connectors with a single DB-9 connector.
- Enlarged the Raspberry Pi logo and made it cut completely through the lid for better ventilation.
- Replaced Alan's name with a larger PicoProbe label (sorry Alan).
- Reworked the button pusher to not need print support.
Note that the SCAD file requires the use of the OpenScad D-Sub Library that can be found HERE.
I printed all of the parts at 0.2mm with 20% infill and no support.