Transport handle for Original Prusa Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Need to carry your Original Prusa Enclosure around? Print these transport handles.
- Ocena
- 4,907 / 5
- Polubienia
- 1100
- Pobrania
- 17 782
- Wydruki
- 440
- Wyświetlenia
- 33 732
- Oceny
- 366
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v2.0
Printable accessory developed specifically to enable you move your Original Prusa Enclosure around easily. The handle is symmetrical, but you need to print 2 pieces.
Check the guide on how to install the Transport handles.
To mount both handles you will need the following fasteners*:
- 6x M3x12 screw (6x)
- 6x M3nS nut (6x)
* The package of the Original Prusa Enclosure includes extra fasteners, which were added in case you need to install the transport handles.
Print instructions
You have two options:
- use the pre-sliced G-code and print it on your MK3S+
- download the latest PrusaSlicer and use the following settings**:
- print settings: 0.30mm DRAFT
- filament: PETG (tested on Prusament)
- 15% grid infill
** Note that print settings are recommended, but you can experiment with your own.