1 / 1
Transport handle for Original Prusa Enclosure
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Need to carry your Original Prusa Enclosure around? Print these transport handles.
- Rating
- 4.907 / 5
- Likes
- 1,100
- Downloads
- 17,782
- Makes
- 440
- Views
- 33,732
- Reviews
- 366
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v2.0
Printable accessory developed specifically to enable you move your Original Prusa Enclosure around easily. The handle is symmetrical, but you need to print 2 pieces.
Check the guide on how to install the Transport handles.
To mount both handles you will need the following fasteners*:
- 6x M3x12 screw (6x)
- 6x M3nS nut (6x)
* The package of the Original Prusa Enclosure includes extra fasteners, which were added in case you need to install the transport handles.
Print instructions
You have two options:
- use the pre-sliced G-code and print it on your MK3S+
- download the latest PrusaSlicer and use the following settings**:
- print settings: 0.30mm DRAFT
- filament: PETG (tested on Prusament)
- 15% grid infill
** Note that print settings are recommended, but you can experiment with your own.