EasyThreed Nano Cooling Fan Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket for an EasyThreed Nano parts cooling fan attachment.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 414
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A bracket to attach a 30x30x10mm part cooling fan to an EasyThreed Nano hotend. You can use whatever fan you want, but the friction-fit has been tested with this fan.
Four “fingers” on the back of the bracket allow rubber band assistance in maintaining bracket integrity and hold to the hotend.
PRINTING:
Tree supports are required to maintain perpendicular faces, and 100% infill assures that the long arms of the bracket won't fatigue and/or break. Print with the “fingers” pointed up, and with the “fan box” on the print bed.
WIRING:
I attached the part cooling fan to the nozzle cooling fan, as shown here. I am not responsible for any damage you incur from modifying your printer.