EasyThreed Nano Cooling Fan Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bracket for an EasyThreed Nano parts cooling fan attachment.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 24
- Makes
- 0
- Views
- 414
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A bracket to attach a 30x30x10mm part cooling fan to an EasyThreed Nano hotend. You can use whatever fan you want, but the friction-fit has been tested with this fan.
Four “fingers” on the back of the bracket allow rubber band assistance in maintaining bracket integrity and hold to the hotend.
PRINTING:
Tree supports are required to maintain perpendicular faces, and 100% infill assures that the long arms of the bracket won't fatigue and/or break. Print with the “fingers” pointed up, and with the “fan box” on the print bed.
WIRING:
I attached the part cooling fan to the nozzle cooling fan, as shown here. I am not responsible for any damage you incur from modifying your printer.