1 / 2
SingingFriend feedR ring (fix)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a ring you can use to fix your SingingFriend feedR when the part the birds sit on breaks off.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
Introduction
I created this ring to fix your SingingFriend feedR when the part the birds sit on breaks off. This happens when a large or (too) chunky bird sits on this part. Glue, caulk or duct tape without any additional support (which this ring provides) will only get you a temporary fix (trust me). As I'm (currently) a complete design noob I designed this in Tinkercad.
How to use
- Print this model (<15 minutes).
- Use glue to reattach the broken off part (5 seconds).
- Wait for the glue to dry (30 seconds).
- Attach the ring using glue (5 seconds).
- Optional: wait for the glue to dry in order to prevent any birds from sticking around too long. ;-) (30 seconds).
Print suggestion
- Filament: PETG-G
- First layer: 240° hotend temp, 80° bed temp
- All other layers: 230° hotend temp, 70° bed temp