Adapter bracket for Artillery SW X1 to a Octopus v1.1 board
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bracket to replace the OEM bracket for the MKS GEN L v1.0 board with an Octopus v1.1
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 346
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a replacement bracket for the Artillery sidewinder X1 to upgrade to an Octopus v1.1 board or any board that shares the same footprint. This has been printed with PETG and is currently in use on my machine. I strongly suggest against using PLA due to the heat that can happen around the breakout board.
It will click into place over the old mounting holes which are then used to hold the bracket and additional M3 machine screws of the same length used to secure the Octopus board
IMPORTANT NOTE: With this bracket you will have to move the case fan or replace it. I choose to move it to the outside of the case and put taller feet on the base that also had a larger contact area on both the machine and on the work surface it is sitting on.
It was printed on a Prusa Mk2.5S at 0.20 layer height with a 0.6mm nozzle