1 / 1
Adapter bracket for Artillery SW X1 to a Octopus v1.1 board — image 1

Adapter bracket for Artillery SW X1 to a Octopus v1.1 board

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a bracket to replace the OEM bracket for the MKS GEN L v1.0 board with an Octopus v1.1

Rating
0 / 5
Likes
0
Downloads
34
Makes
0
Views
346
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

This is a replacement bracket for the Artillery sidewinder X1 to upgrade to an Octopus v1.1 board or any board that shares the same footprint. This has been printed with PETG and is currently in use on my machine. I strongly suggest against using PLA due to the heat that can happen around the breakout board.

It will click into place over the old mounting holes which are then used to hold the bracket and additional M3 machine screws of the same length used to secure the Octopus board

IMPORTANT NOTE: With this bracket you will have to move the case fan or replace it. I choose to move it to the outside of the case and put taller feet on the base that also had a larger contact area on both the machine and on the work surface it is sitting on.

It was printed on a Prusa Mk2.5S at 0.20 layer height with a 0.6mm nozzle

Tags