80mm spindle cnc router C-Beam holder with 100mm detachable dust extraction hose
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for an 80mm HF spindle with removable adapter for the suction hose and brush shoe.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 1506
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Holder for an 80mm HF spindle with removable adapter for the suction hose and brush shoe.
still needed:
screws
8 times 5 x 12 mm for the basic holder and the upper ring
2 times 5 x > 10 mm for the hose holder
1 time 5 x 12 mm for the upper ring
3 times 5 x 20 mm for the holder
4 times Openbuilds Tee Nut
Neodymium magnets round 8 x 3 mm
11 times holder
11 times brush shoe
1 time cover
70 mm nylon dust cover brush
The lid is to close the suction hose, because then I can suck with another hose at a T-piece.
Print all parts on the magnetic side to the printing bed.
The hose holder needs some support, the rest does not.
Halter für eine 80mm HF-Spindel mit abnehmbaren Adapter für den Absaugschlauch und Bürstenschuh.
weiter benötigt:
Schrauben
8 mal 5 x 12 mm für den Grundhalter und den oberen Ring
2 mal 5 x > 10 mm für den Schlauchhalter
1 mal 5 x 12 mm für den oberen Ring
3 mal 5 x 20 mm für den Halter
4 mal Openbuilds Tee Nut
Neodym-Magnate rund 8 x 3 mm
11 mal Halter
11 mal Bürstenschuh
1 mal Deckel
70mm Nylonbürste
Der Deckel ist zum verschließen des Absaugschlauches, da ich dann mit einem anderen Schlauch an einem T-Stück saugen kann.
Alle Teile auf der Magnetseite zum Druckbett drucken.
Der Schlauchhalter braucht etwas Support, der Rest nicht.
Print instructions
Category: Parts