80mm spindle cnc router C-Beam holder with 100mm detachable dust extraction hose
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holder for an 80mm HF spindle with removable adapter for the suction hose and brush shoe.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 91
- Makes
- 0
- Views
- 1,510
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
Holder for an 80mm HF spindle with removable adapter for the suction hose and brush shoe.
still needed:
screws
8 times 5 x 12 mm for the basic holder and the upper ring
2 times 5 x > 10 mm for the hose holder
1 time 5 x 12 mm for the upper ring
3 times 5 x 20 mm for the holder
4 times Openbuilds Tee Nut
Neodymium magnets round 8 x 3 mm
11 times holder
11 times brush shoe
1 time cover
70 mm nylon dust cover brush
The lid is to close the suction hose, because then I can suck with another hose at a T-piece.
Print all parts on the magnetic side to the printing bed.
The hose holder needs some support, the rest does not.
Halter für eine 80mm HF-Spindel mit abnehmbaren Adapter für den Absaugschlauch und Bürstenschuh.
weiter benötigt:
Schrauben
8 mal 5 x 12 mm für den Grundhalter und den oberen Ring
2 mal 5 x > 10 mm für den Schlauchhalter
1 mal 5 x 12 mm für den oberen Ring
3 mal 5 x 20 mm für den Halter
4 mal Openbuilds Tee Nut
Neodym-Magnate rund 8 x 3 mm
11 mal Halter
11 mal Bürstenschuh
1 mal Deckel
70mm Nylonbürste
Der Deckel ist zum verschließen des Absaugschlauches, da ich dann mit einem anderen Schlauch an einem T-Stück saugen kann.
Alle Teile auf der Magnetseite zum Druckbett drucken.
Der Schlauchhalter braucht etwas Support, der Rest nicht.
Print instructions
Category: Parts