1 / 5
Air quality lamp for CO2 metering (MH-Z19, esp32 and neopixel)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Air quality lamp for CO2 metering. Designed by Lilifee (look at the remix). Used parts: MH-Z19, esp32 and neopixel
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 134
- Wydruki
- 1
- Wyświetlenia
- 1912
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 1) (Komentarze: 6)Remiksy (1)Kolekcje (51)Powiązane
This is a air quality lamp for CO2 metering. I used the design from Lilifee (look at the remix).
The original was for the BME680 Sensor. I needed the case for the MH-Z19. So I changed the inner of the case and the "Top"-part. The “Stand”-part is untouched.
The parts I used inside the case:
- WEMOS ESP LOLIN32
- WS2812 LED ring with 24 LEDs
- MH-Z19b
- 4 small screws to keep the ESP and the BME in place ~M1.7x5
- 3 screws for the top cover ~M3x8
I added the "3mf"-file because of the infill trick (look at the blog post her). I used the honeycomb infill with 30%.