UPDATE: Dial indicator mount for Unimat SL or DB
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for a dial indicator for the Unimat SL 1000 or DB 200 lathe. There is also a stop for the slide.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 130
- Wydruki
- 2
- Wyświetlenia
- 840
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
Update 2022-08-07: I added two new versions that clamp to both rails. I also added a bit more mass to the mount.
I have two .stl files for you.
1. Dial indicator mount for a cheap standard indicator
2. A clamp for the other side of the mount, or you can print two to create a stop.
You may need to remove the back of the indicator and replace rotated 90 degrees.
You will need some M4 x 20 hardware for clamping and M6x20 to mount the dial indicator.
You will need to drill the hole on the mount or the top clamp to allow M4 to pass. I did not leave any clearance to allow you to customize where you want the bolts.
Amazon links to hardware:
M4 cap head screw kit: https://amzn.to/3Sv9xi0
M6 cap head screw kit: https://amzn.to/3BNDaoT
Cheap Dial indicator (Metric): https://amzn.to/3BPapZ6
Cheap Dial indicator (SAE): https://amzn.to/3bD5S16
Check out my youtube channel for more on this Lathe and my many adventures restoring old toys. https://www.youtube.com/c/ReadTheFactoryManual