Liczymy pasujące modele…
These models allow you to 3D print some mounts for NEMA 17 motors for your Unimat 3 lathe. I've then added 48 tooth GT2 pulleys to the NEMA and the Unimat leadscrews which both have 5mm diameter mounts. I then used a closed loop GT2 belt…
Update 2022-08-07: I added two new versions that clamp to both rails. I also added a bit more mass to the mount. I have two .stl files for you. 1. Dial indicator mount for a cheap standard indicator 2. A clamp for the other side of the…
Erweiterung einer EMCO Unimat SL zu einer CNC Drehmaschine. Bei diesem Umbau geht kein Verfahrwege der Maschine verloren. Die Handräder können weiterverwendet werden. Die Z-Achse wurde an dem optionalen automatischen Vorschub der Unimat…
The wonderful EMCO Unimat 3 lathe, for all its extensive set of attachments never had anything resembling a back gear nor did it have the analog of the slow speed pulley bracket available for the earlier Unimat SL. This pulley set is an…
Reduced depth handwheel which allows for the addition of a needle thrust bearing between the handwheel and the lathe body. Greatly improves cross-slide and longitudinal feed feel. No binding and allows for a smooth consistent feed.…
For standard 8mm indicators. As a screw I used a standard m3 screw with a 3d printed knurled head. The hole you have to probably thread before. Model with inserted nut might be coming later
A Steady Rest is useful for supporting long parts in the lathe by stabilizing the part. The bearings provide low friction support (making it ‘live’-support?). This 3D-printed part is not intended for heavy duty and cannot withstand direct…
I made a remix of the Proxxon Vice Clamp (see: https://www.thingiverse.com/thing:1298491 ), so I can use it with my Unimat 1 tool set. Now it has slits for the Unimat mounting system and the centerheight is 5 cm from the bottom. Print…
Manivela mini yorno Zhouyu
This is a remix of an earlier published clamp for Proxxon micomot tools. This one fits in the 5x5x5 cm raster of the Unimat Toolset. That also means you can only use it for the smaller Proxxon Micromot series like 50E Print instructions…
EMCO Unimat Lathe Indexing and Dividing Plates Used for operations such as gear cutting and other indexed machining tasks on the lathe or milling attachment. The indexing plates fit the Unimat DB/SL Lathe Indexing & Dividing Attachment…
Remixed Model from GuzZzt, which uses M3 screws for clamping the caliper and to the lathe
I own a tool set called "Unimat 1". With this set you can create a small lath, sander, drill, milling machine etc. It consists of plastic and aluminium parts for interconnection. I needed a "universal" interconnection block 5 x 5 cm, to…
Not much to say, print it and use it for better machining accuracy, works great with my tailstock wall mount. You will need two m6 nuts and two m6x20mm bolts for 5mm hex key. Print Settings Printer Brand: Anycubic Printer: Semi-closed…
Printed solid with CF Nylon. Turned down speed on threaded area. Link for bearing:…
This tool allows mounting a dial indicator monitoring the X-axis movement of the cross-slide on the Unimat 3. Using the same mounting as the tailstock, it is easy to work with. Not as robust as a metal made version, this is good enough…
Printed in 2 pieces to ease printing requirements and cleaning of it. PLA or any material works.
PETG/ABS/equivalent recommended. The design derived from measurements of the broken original part. Since there are hardly any unbroken guards on these machines, the jointing part was considered unfit for purpose and made sturdier here.…
The Unimat lathe has no cover over it's Y axis, where most of the chips collect. These two covers allow turning and drilling operations and this way you can protect you ways. They are installed via magnets and work very well. Video:
EMCO Unimat X-axis dial gauge attachment Enables a dial gauge with an ~8 mm shaft to be attached to the Emco Unimat lathe. An M5 nut and hexagon screw are also required for this model. The suitable length for the screw is 20 mm. The hole…
There have been a few Unimat boring head designs over the years. For instance the Compact Micrometer Boring Head' by GA Harding described in Model Engineer 4th June 1982 and 'A Small Boring Head for the Unimat 3' by BR Davies in Model…
See this connector applied:
Converting the lathe for 5mm wide synchronous belt. Printed a mock-up from PE, but I did use them for real lathe work as well without problems. Lathe pulley has 14x1mm thread. Motor axle 14mm with 5mm key.
This model was designed to raise the Unimat SL1000 2.5" off of my table using the holes and cast base given. I used long M3 bolts to clamp to my table. Printed in Nylon for strength and to dampen any vibrations. 20% infill or more works…
Just added a second hole for a magnet, should fit, but might have tight clearances.
Hi, another usefull model is ready to be printed. When i am not using tailstock it stands in a way, using this mounts make machining much easier because there is nothing in a way for rotating x axis wheel. Print Settings Printer Brand:…
PETG/ABS/equivalent recommended. One version symmetrically as measured and one for easier printing that needs a mirrored counterpart to replace both hinges.
EMCO Unimat Z-axis dial gauge attachment Enables a dial gauge with an ~8 mm shaft to be attached to the Emco Unimat lathe. Two M5 nuts and hexagon screws are also required for this model. The suitable lengths for the screws are 20 mm and…
Keeps the T slot clean in front of my Multifix AA QCTP. Nice spring friction fit
The OpenSCAD file with the modifications to the original STL is included. The parts are printed in PETG, PLA is less suitable because it will not properly clamp. ASA would also work. Infill can be raised (25%), but adding more perimeters…
EMCO Unimat Chip Tray Emco Unimat lathe chip tray, which collects most of the chips. The magnets are 5 mm x 5 mm in size and are not essential. The purpose of the magnets is to keep the tray in place better. When using, make sure that the…
This simple clamp allows the Unimat 3 milling column spindle to be locked from rotating, thus allowing the placement of a digital indicator or dial indicator in the Jacobs chuck. Using the leadscrew handwheel, cross slide and vertical…
Der Block ist bei mir in Einsatz. Die Platte habe ich designed, da die mitgelieferte inzwischen stark angesägt ist, daduch das die eine Schraube keinen Halte mehr hatte. Habe es aber noch nicht gedruckt und weis somit nicht ganz sicher ob…
The Unimat 3 lathe is a great device to modify. As a pretext for changing the motor and drive system, I modeled the standard motor and middle pulleys. Current filaments are probably not strong enough to print pulleys for real use, but…
A tool tray for the emco unit 3 micro lathe to hold on to chuck keys and an Allen key
Breite Werkzeugauflage für die Unimat1 Drechselbank damit die komplette Werkstückbreite bearbeitet werden kann.
I made this as a companion piece for UnimatrixReds's Discovery Phaser stand. He made a cool version of the Programmable matter cuff link that served as a holster, but not a way to display it, so I decided to make my own. I have two…
Unimat 3 lead screw protection, one file is the original version that came with the machine. Second is a slightly longer version with a taller side, this makes it easier to secure with cable ties I cut a small piece of sponge and stuck it…
Replace broken buttons with the drop-in replacement. Print in PETG for the slight flex in the clip PLA will be brittle. -wall thickness 0.5mm -0.2-layer Hight -No support needed
Here are my models for a Unimat 3 pulley cover. There are four files included... Original = this is the default model, but as it has raised surfaces on the face it maybe hard to print as you'd need a large support structure. Recessed =…
This is an accessoire for the Indexing & Dividing Attachment Peters summary: There is an index plate with 16 divisions in the part list from Emco. I never find one. So why not have one from the 3D Printer? In the file Indexierscheibe.scad…
The original motor for the Unimat 3 has its limitations; few fixed speeds, limited run time, expensive replacement parts, low power, ... Replacement motors and regulators are cheap, but come without a proper case. This model is a fix for…
This is my improved protector, this allows for sponge to be placed inside each of the two pieces. The sponge stops swarf getting into the screw and you also add grease/lubricant to the sponge to provide continual lubrication. The three…
Simple Gib to replace the one in the Unimat 3 cross slide, dimensions are accurate. Can be printed in any material, but i suggest one that easily sands like abs, printing on a smooth pei sheet or glass will also be a great help. STL and…
