EMCO Unimat Chip Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small chip tray for Emco Unimat Lathe.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
EMCO Unimat Chip Tray
Emco Unimat lathe chip tray, which collects most of the chips. The magnets are 5 mm x 5 mm in size and are not essential. The purpose of the magnets is to keep the tray in place better.
When using, make sure that the lathe chuck does not hit the tray!
Note
The same version of this model is also available on Thingiverse. For documentation, printing instructions, updates, and the changelog, visit: https://www.thingiverse.com/thing:7255653
License
Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)
You are free to:
Share — copy and redistribute the model in any medium or format
Adapt — remix, transform, and build upon the model
Use commercially
Under the following terms:
Attribution — You must give appropriate credit to the original author
ShareAlike — If you modify the model, you must distribute your contributions under the same license
This model is provided as-is, without warranty. Use at your own risk.