Unimat 3 Pully Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here are my models for a Unimat 3 pulley cover.
- Ocena
- 5 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 1
- Wyświetlenia
- 37
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
Here are my models for a Unimat 3 pulley cover. There are four files included...
Original = this is the default model, but as it has raised surfaces on the face it maybe hard to print as you'd need a large support structure.
Recessed = Instead of a raised 'Unimat' logo, I have recessed it, this is much easier to print whilst still having a Unimat logo
Flat face = the logo and surrounding raised brim have been removed, leaving a flat face which is much easier to print.
Logo and rim = If you'd like the Unimat logo, this will print the raised brim and wording as a separate piece, you can then glue this to the 'flat face' version to have an authentic pulley cover.
If you have any ideas on how I could modify these to make them easier to print, feel free to give suggestions in the comments.