1 / 3
EMCO Unimat PC - Chuck guard | Futterschutz | Protection de mandrin - Replacement for Ref.No. A4A 000 430 — zdjęcie 1
1 / 3

EMCO Unimat PC - Chuck guard | Futterschutz | Protection de mandrin - Replacement for Ref.No. A4A 000 430

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Matches part Ref.No. A4A 000 430 for old EMCO Unimat PC mini lathes. Intended to prevent injuries, only helps if used.

Ocena
0 / 5
Polubienia
5
Pobrania
42
Wydruki
0
Wyświetlenia
533
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

PETG/ABS/equivalent recommended. The design derived from measurements of the broken original part. Since there are hardly any unbroken guards on these machines, the jointing part was considered unfit for purpose and made sturdier here.

Variant 1 replaces the entire unit (1x M5x50 or M5x55 hex socket screw).

Variant 2 only provides a new joint (1x M5x50 or M5x55 hex socket screw + 4x M3x10 & washers), intended to mount the remaining part of the original clear plastic.

Varinat 3 just gluing it back together didn't do it for me.

Tagi