1 / 4
Prusa MK3S / MK3S+ Z-Axis Rattle and Noise Fix
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple modification of the z-axis top printable parts which provides a firm grip for the smooth rods.
- Ocena
- 4,75 / 5
- Polubienia
- 64
- Pobrania
- 475
- Wydruki
- 5
- Wyświetlenia
- 3214
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 5) (Komentarze: 9)Remiksy (0)Kolekcje (130)Powiązane
This is a simple modification of the z-axis top printable parts which provides a firm grip for the smooth rods. Original part did not hold the rods firmly which caused a lot of vibration and rattle during homing and printing. Simply print and replace the z-axis top covers. Use the original screws.
Recommended Print Settings
Supports: No
Material: PETG
Infill: 20% Grid
Layer Height: 0.15 (recommended) or 0.2