Wyniki wyszukiwania: rattle

Articulated Rattlesnake with super-fun rattle

from https://www.thingiverse.com/thing:5649133

Articulated Rattlesnake with super-fun rattle

Print-in-place: Single print - no assembly, no supports A remix of my snake with scales, but this time added a working rattle. So fun. Lots of articulation and detail. Print turns out great, comes off clean. Prints a rattlesnake 22" long…

Baby Rattle Fidget Toy - Print in Place (See video)

5015 Fan Vibration & rattle killer

simle clip to cancel the rattle and vibration

Rattle Trap Fishing Lure

This is another fishing Lure I'm working on... this one is a Rattle Trap Lip Less type lure. I've only tested it with my ultralight pole so far and it was a tad bit erratic. I think it might need a little more weight up front to get the…

Rattlesnake v2

A remix of my fun articulated rattlesnake with springy rattle. Updates from version 1: My first version was shorter than I would've liked, so this one is a little longer. After awhile the rattle broke off, so I revamped the design for…

Easter rattle | Velikonoční řehtačka

NO GLUE. "Řehtačka," also known as "hrkačka" or "brkač," is a traditional wooden device that produces noise, similar to clappers, mills, and various other homemade tools that were traditionally used to call people to church services…

articulating fidget rattlesnake v3

Introducing Rattlesnake v3 een cool and strong rattlesnake that is flexible and realistic. TIP. rattlesnake v3's tail is slacker than rattlesnake v3 big. and I hope you have fun with this improved design. and don't forget to like and follow

Prusa MK3S / MK3S+ Z-Axis Rattle and Noise Fix

I have Z-Axis rattle noise since I have my MK3S+ and searched multiple fixes. Including here I found some. But nothing seemed to fix the issue that I have. However thanks to sabaatworld I actually found out why I have this noise. He has…

Baby's First Mjolnir (Rattle) - safer and no-glue version

Wanted to print Mjolnir for my friends newborn but the hole closed only by the glued hilt did not feel safe. So I closed the hole - you have to add some marbles or other rattling items during print and they are safely enclosed by top…

Snap-Together Cat Rattle Ball Play Toy

Snap-together rolling ball with semi-round smaller ball inside so it doesn't roll straight. No glue needed. My cats love them! I also cut off small bells from broken cat toys and add them inside to make new cat toys. The ball is printed…

Print-in-Place Nested Pentagon Fidget Rattle

update: 7/18/22: added a small stand to keep rings extended and a version without a raised center. -- print-in-place The sound made when shaking reminds me of a rattle snake or a maraca. (I used eSun PLA+) I developed and printed this as…

Flower rattle

We use this model as a gift for born babies of our friends. We add the name of the baby to one flower leaf and the name of who gives the flower to the other one. Reduce the model as needed, I usually reduce it to 70% ratchet then it has…

Baby Sword Rattled with threaded handle

I made this model for a little guy, and as PETG and superglue may have a tendency to separate one day (due to PETGs amazing chemical resistances). Printed in PETG, and superglued together, these threads will be extremely hard to seperate…

Egg percussion shaker rattle

Egg percussion shaker rattle It prints in one piece with the beads sealed inside the egg. Once printed just drop the egg onto a hard surface a couple of times to free up the beads and start shaking :) See it in action here:…

Ultimulti - Idler Remix - no rattle/quiet

Remixed the R17 Ultimulti version of the idler to remove rattling sound when idler moves. Remix of the original Prusa standard idler version here . Print as oriented. This remix adds a .5mm bearing spacer to each wall of the bearing slots…

Prusa MK3S / MK3S+ Z-Axis Rattle and Noise Fix

This is a simple modification of the z-axis top printable parts which provides a firm grip for the smooth rods. Original part did not hold the rods firmly which caused a lot of vibration and rattle during homing and printing. Simply print…

Cat Ball Toy with Rattle

Simple cat toy ball with rattle. The rattles were printed in different colors than the balls and dropped in during a pause when printing the ball. I found producing good results with minimal warping on the lower half of the ball requires…

Rattle-free/quiet Prusa MMU3 Idler

Remixed the standard R4 version of the idler to remove rattling sound when idler moves. Remix of the Ultimulti version here: https://www.printables.com/model/893656/ Print as oriented. This remix adds a .5mm bearing spacer to each wall of…

Mjolnir - Baby Rattle

Remix of baby rattle, prints in one go. Just toss a couple marbles in the head when the walls are high enough.

Rattlesnake v2.2 - 6mm glass eye compatible

I just found a new home for some 6mm glass eyes. In the head of this rattlesnake! :) 3mf file provided. Holes for eyes should appear in print preview after slicing. I didn't use a brim on this one. The file does come with built in…

Baby Shield Rattle

I made this to go with the baby sword rattle by Targ . This baby shield rattle prints in separate pieces to minimize support. The four inserts contain the rattle medium and should be printed on edge with at least 4 perimeters and zero…

[V2.0] Adjustable Y-Axis Bearing Holder for MK3 - Fix That Rattle!

Version 2.0 Update It became clear that overtightening the holder on the lateral adjustment screws can cause the bearing holder to crack. While this did not seem to affect print quality, it's not a good thing to have a cracked bearing…

Rattlesnake rattle

Start by printing two end segment parts and gluing them together. Add additional segments by printing pairs of segment parts and gluing them around the previous segment (see the cutaway diagram to see how the segments fit together). Shake…

Spinning rattle

This rattle makes a rattling sound based on the rotating movement of the hand.

Harbor Freight Cabinet Door Rattle Fix

Use these clips to get rid of the annoying rattle on the Harbor Freight Cabinet Doors. Just pop them on to secure the locking rods in place, and prevent them from rattling. This fits the U.S. GENERAL 22 in. End Locker, Series 3.

Voronoi cat toy with rattle

This remix incorporates a hollow cube printed inside the ball to give it a rattle sound. The cube prints precariously perched on the bottom of the ball interior, so that it can be easily broken free with a tool. I used glow PLA so my cats…

Spray paint can mixer - shake those aerosol rattle cans easily!

Includes step files, Prusa Slicer .3mf file, and the fusion 360 file. The hole size is for 67mm or smaller cans. Use a 5/16 inch nut and bolt or M8 nut and bolt. You will need some type of thread locker to secure the nut in place, like…

Baby Rattle

A baby rattle for my nephew. It is a print in place toy. After printing and removing supports it is ready to play. I used width of 3 walls and 10% infill. Works well for me. The more infill, the toy will have more weight and I was aiming…

Spinning Rattles (different sizes, different noise, different sound)

This rattle makes a rattling sound based on the rotating movement of the hand. Thanks to @fifo182 for the cool basic design. Re-designed to three overall sizes and then different lengths of the main bodies for different sounds. Explore my…

Rattlesnake keychain

Re-scaled 150%. 4 wall-lines No Support You must place it -1 mm into the print bed, to print without support.. Re scale if you like it bigger ;)

Piston Baby Rattle

Introducing the Piston Baby Rattle to turn every baby into the gear head you have always wanted. This little rattle can be filled with a child-safe noise maker of your choosing (rice, barley, etc.) Print in PETG on a slow speed for…

Cat Toy With Rattle

I have added two small balls inside the toy which makes a rattle sound. This makes it interesting for the cats.Cat toy v3 have increased thickness of the sphere from 2mm to 3.2mm. Increased thickness can give more strength compared to cat…

5015 Fan Rattle stopper

My cheap Winsinn fans make a pretty terrible rattling sound when printing at accelerations over 5k. This eliminates most of the rattling sound by pushing the fan against the hub. The pressure on the hub can be adjusted by sliding the…

i3 MK3S Anti Display Rattle Thingies

The thingies will sit snug and apply just enough force to the display cover to prevent most of the rattling. [update] Added slightly larger variant in case the small one sits too loose. How to Print No Infill No Top Solid Layers No Bottom…

ÇINGIRAK ( rattle ) Baby toy

Put 15 m3 nuts inside during the pressing phase.

Anti-Rattle Bushings for Ender3 V3 KE/SE Y-Axis Linear Rods

The Ender3 V3 KE used to have two screws in the front that would hold down the linear rods in the base housing. Recently, there was a design change and Creality eliminated those screws (they were also too short). Now, on some production…

Baby sword rattle with embossed Norse runes

This is a remix of Targ 's Baby Sword Rattle , with embossed Norse runes added to the blade. They spell the name of the name of the baby this gift is for. I only added to the design of the blade. The other model files and detailed…

Magic rattle wand

I created this wand as a toy for my daughter some years ago. She made great fun out of it! All the parts can be printed separately in different colours and materials to match your kids preferences. The print quality is good enough at 0.2…

snake rattle

non

Gas canister Rattle Guard

No more Ratteling This is a simple ring that fits around the bottom of the gas canister that prevents the “infernal” sound of it moving inside my Primus or Jetboil stove. I use id for the 100g canisters as they fit inside my stoves, but i…

Fishing Lure - Bullet plug - 4 inch with rattle chamber

This one catches big fish. Based on .50 caliber round, it's a rattling fishing plug that nets out to 4 inches. How to print - stand these on the nose, and put a modifier across half of the lure so that it is higher density on the bottom…

Cat Toy - Hanging Rattle Ball

Overview - This model contains a (roughly) 15mm ball that can be hung from the ceiling using a piece of string. Inside, is a smaller ball that rattles around when knocked/pushed. This model can be both scaled up or down. Assembly - This…

Rattleback shape

A rattleback, or Celtic stone, is an asymmetrical, semi-ellipsoidal object that exhibits a peculiar motion where it spins stably in one direction but wobbles and reverses when spun in the opposite direction due to its uneven mass…

Baby Rattle - Cookie Cutter

Baby Rattle - Cookie Cutter

Fishing Rattle

I couldn't find any other models like this so I made one to use. Simply stop the print about halfway or so and drop in a small lead or steel sinker and resume the print.

Sailor Moon Baby Rattle

I designed & printed this Sailor Moon baby rattle for my niece, and wanted to share it with other fans. Layer height : 0.2 or 0.12 Infill : 10 - 25% for everything but the Moon. Supports : the Moon, Pommel, and Hilt need a small amount of…

Rattle Ball - Baby Toy

Easy to print rattle ball for the small ones to chase around. The ball is available in two diameters - 9cm and 13cm. It's a nice way to turn your almost empty spools into simple colorful toys. The ball can be assembled without glue and…

Creality Falcon2 Pro - Anti-rattle Slat Brace (TPU)

Falcon2 Pro Collection A TPU brace to hold your slats in place so they don't shift around when putting material on the bed to cut precisely. Print two sets to fully cover the slats in any orientation. Print as oriented. Default FLEX…

Makita 18V battery cover (rattle free)

For transport in planes and in my backpack I am always concerned that the somewhat open contacts may get shorted by something metal and pokey. With a new tool only one of the flimsy push on safe guards are delivered and they do come off…

Rattle-Trap fishing lure

Rattle-Trap lure

Rattle/Řehtačka

The rattle can be folded very easily. Connect the gear wheel and the rod by inserting a pin.

Rattlesnake V3

Fixed the supports on the tail to prevent print failure.

Cactus desert mound- display for articulated rattlesnake

All good prints need a good display piece. Print cactus in green and base in brown, grey or other desert color. The 3 Cacti are to be places in the 3 depressions made for them on the mount Scale to fit your print bed or even print 2 rocks…

Rattle reel

This is a rattle reel for ice fishing, it lets you know when a fish has your bait by rattling. All you have to do is put 10-15 2-3mm steel BB's in the base then glue the top on and you are good to go. Supports: only for the mount DO NOT…

5015 Fan Rattle Killer (with cable hole)

A simple clip for 5015 blower style fans that limits / completely removes vibration and rattle. This remix also includes a hole for cable management as I needed to run the wires along the side. This did work for me with my fans but your…

Rattlesnake Tail

Important! I modeled in Imperial units. Import as imperial or scale it by the conversion factor of 2540%. Use 0.2mm layers. Would likely be best to fill gaps/add extra perimeters if needed. Use supports, I used organic supports and clear…

Rattle toy

un petit personnage hochet à imprimer pour les petits. pas de forme agressives et un réservoir intérieur pour y glisser.

Skull & Bone Baby Rattle (separate files)

Not really a remix, i just separated the rattle itself from the spheres. All credit for this awesome thing go to the original author.

Fan Rattle Fix for X / P Series

A lot of X and P series owners like me have complained about rattle noise during fast prints and heavy vibration. If you haven't looked at the part cooling fan in the hot end cover yet, check and see if the screws that hold the fan in are…

Prattle Pins from keeper of the lost cities.

These are some prattle pins from the book series Keeper of the Lost Cites. I got the photos that I turned into relief sculpture here . Powered by Relief Sculpture Maker from MakerWorld (https://makerworld.com/makerlab/…

Kia Stinger Boot/Trunk Rattle Fix

Kia released a kit to help fix the rattle that starts in the boot/trunk. It consists of a thicker felt pad and a set of washers to put under the bumper guides (last photo shows this kit). The kit doesn't seem to be available outside the…

CF Rattlesnake

If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP --- The CF Rattlesnake is shown coiled tightly, its head…

Rattle Drum Toy

Print it and make some noise! A detail textured surfaces with dragon scale handle and emboss dragon image. Functional and loud. Prints with no support. An Open Source Project - Fusion360 File Available! Print instructions If you plan to…

Peeps baby rattle

Cute last minute Easter gift I remixed. I used 15% infill and 0.2 mm layer height. I printed 5 “peas” for each rattle. Post your makes!

Rattle Egg / Maracas

Print stops and makes a filamentswap. Just follow instructions. While stopped put in some rice or similar. Continue print.

R36S D-Pad, Tight-Fit, No Rattle

My custom made D-Pad for the R36S console. The stock D-Pad was rattling and had sharp edges. my version eliminates both of those things. Printed face-down at 0.08 layer height, 30% infill, no supports.

Grogu lightsaber and blade rattle

I like making fun rattles for my son so I had to make a blade for this model. I put a few drops of super glue on the threads and works great I but beans inside the blade while it was printing with tweezers. Use real beans or the ones…

Nissan / Datsun 240 260 280 Z S30 Cowl Anti Rattle Clips

These are the small clips that attach to the base of the windshield frame, and allow the cowl to be installed. I printed it in PETG. No supports required.

"Rattlesnake" Meshtastic Tree Node

This node design requires many parts to complete, and documentation is solidly a WIP. However - here are the parts I designed around: Solar Panels (6x): https://a.co/d/8jMYsYe Shottky Diodes (6x 1N5817): https://a.co/d/blj1DMV Battery…

OAK BABY RATTLE

The inspiration for this design came from my nephew, who loves the movement of the oak leaves. The leaves and the ring are in different files. The original measure of the ring is 10,6x10,6 cm, if you want one smaller, you can change the…

Rattle-Free Minimalist Dice Vault

I designed this dice vault to transport my dice in a minimalist container that makes very little noise. Dice vaults that I've used and designed before had a super loud rattle that could be heard through my backpack, but this vault solves…

Cat Rattle Toy Ball

Do you like cats? Do you like fun? Do you like endless sleepless nights?! Then the Cat Rattle Toy Ball is 24/7 fun for your cat! No supports or glue are needed. Assembles using a locking pin to securely connect both ball halves together.…

Sage Breville Bambino plus anti-rattle clamp

This clamp prevents rattle from the drip-tray on the Sage/Breville Bambino plus. Easy to remove for cleaning the drip-tray. I printed this in PLA

Airsoft VFC MCX Rattler GBBR Omega-nub hop-up tensioner leg

stampatelo in PLA con nozzle da 0.4mm e 0.15mm di layer STAMPA SENZA SUPPORTI

"Working" Compressor and 1 Inch Rattle gun for scaler 1 10 scale

This is a 1/10th scale compressor and rattle gun for the workshop as decoration or other. The rattle gun is Snap On style and would usually be red and comes with a 55mm nut that would usually by black, the compressor is made as to be…

Baby rattle keys

Here is Baby rattle keys inspired by watching my niece play with the lady rainicorn articulated model, So I thought I should make her something. Print settings, Supports needed you can use the one without the support plate if so, supports…

Baby rattle with triple or twin handles - Maracas

I removed the handle and replaced with smooth round handles. My son likes to put the single handle from the original rattle into his mouth while on his belly, which isn't safe in case he flop face down. With the smooth handles, it can't…

Stamp, Rattle & Roll Modular Rolling Pin with sensory rings and sounds

Stamp, Rattle and Roll is a fully 3D printable sensory toy designed for children from the age of 3 . It combines, rolling, stamping and sound in a modular system with interchangeable texture rings for creative play with dough, clay or…

Cat Rattle

Sealed sphere with three internal orbs and a center hole for the dangle/pull string.

Anti-rattle curved plate guides for Core One L Skadis mod

The Skadis mod for the Core One L made by @lostinthesloths worked great, with the exception that the build plates would rattle in the rails when printing something that caused a lot of vibration. Looking at remixes for the original Core…

Print in place rattle

This 3D-printed print-in-place rattle is manufactured in one piece and ready to use immediately. The textured handle ensures a comfortable grip, while the ball inside creates a gentle rattling sound when shaken. With custom-engraved…

Anti-Rattle Revo Nozzlebreak Holder for MK3S+

Got an MK3S+ with a Revo Six? Tired of the nozzles rattling in the plastic holder that you printed? I was too. A bit of pondering and I realized that I could make a holder with a tapered hole that would hold the nozzle by the silicone…

Short LCD Support Brackets Prusa MK3: 13mm shorter + no rattle

Here is a shortened and improved version of prusa lcd support brackets to fit in a enclosure. They are 13mm shorter and have a little rip to tighten the fit with the lcd display (no rattle from the display anymore). To mount the assembly…

Rush pinball shooter lane rattle fix

Get better ball launches on your Stern Rush pinball machine! For TL;DR, skip to “Parts Required” below. This is based on the design that was originally released and sold by the NinjaCamp (NC) shop on Pinside. Unfortunately their shop at…

Anti-rattle glass holder for X3D-v2 AMS Riser

I found the original holder from X3D allowed for the glass to slide from side to side and rattled during prints. With the Bambu Lab X1s and P1s violent movements, the glass can potentially fall off the original holder Therefore, I did the…

WW1 GAS ALARM RATTLER *Print in place*

Introducing the one..... the only....... amazing WW1 gas rattler fidget!!! This is a print in place, 100% original model of a WW1 gas alarm rattler fidget.

Easter Rattle/Řehtačka

The ratchet can be easily folded using a pin. You can watch my video on how to assemble the rattle. (in the video is smaller version) https://youtube.com/shorts/rq4odhui-9A?is=xYTezCkVkp2Mv6w9 I would be happy if you subscribed and liked…

Spraycan holder (No rattle and side movement)

There are many can holders out there but many of them is not usable for mechanics on the move because they do not “hold” the can and stop it from ratteling around in the car / truck. note there is a small recess on the backside for dubble…

Rattle teddy bear

Chrastítko medvídek (sedí na RUKOJET RAZITKA)

Kryptonite U-Lock Anti-Rattle Washer

I was so annoyed with my Kryptonite bike lock rattling so much when cycling. Printed these tightly fitted washers and it's a bliss. Simple PLA, but probably even better with some flexible filament. Adjust Z to fit your gap.

Baby Rattle Cookie Cutter

🔹 PRODUCT DESCRIPTION Create charming themed treats with this Baby Rattle Cookie Cutter. Perfect for cookies, biscuits, fondant, cheese, bread, and modeling clay. Ideal for baby showers, newborn celebrations, party favors, and creative…

Easter Rattle, Ratchet

Hello, Welcome to my profile, full of models and miniatures :-) I have an Easter Rattle for you, Ratchet. It prints really well. You need to use supports! If you are interested in my work, the links are here:…

Hyundai i20N (2020 - 2024) - Rear Seat Rattle Fix Bracket

EN Does your Hyundai i20N (model years 2020-2024) suffer from an annoying rattle coming from the back seats, especially when driving over uneven surfaces? You're not alone. The source of the noise is excessive play in the factory plastic…

Master Lock 410 Rattle-Proof Body - Deeper screw holes

I could not find M3x16 bolts at my hardware store, so I bought a bunch of M3x15. They turned out to be too small. Rather than going to another hardware store and buy another box of bolts, I modified the 3D model. I also added sacrificial…

Anti-rattle Ragim Quiver Tube Insert

Insert into a Ragim brand belt quiver(http://www.ragim.org/product/accessories/quiver-2t) to prevent arrow rattling. The quiver this is intended for has 2 tubes, one is by about 2 cm longer. The middle part has to be printed twice to fit…

undercover rattle reel holder

This is a rattle reel holder that sits under the cover (Undercover) of you fish house. Flips nicely up into place when you reel gets a bite. This is a good design for tight or cluttered spaces.(note this is not an auto-setter).For better…

No-rattle sheet holder - Core One

Holder is intended for a single sheet, but additional sheets could be accommodated with diminished anti-rattle power. The design includes 7 recesses for 15x3 neodymium magnets. The two sheet-retention magnets could be secured with…

Negative trash rattle

WARNING: not recommended as a first print (because it requires trash that your 3d printer makes when printing) print instructions This model does require a good layer adheasion and a lot of perimeters/infill . Set your slicer to pause the…

Adult Sized Baby Rattle

This is a large baby rattle made of 2 parts: a hollow head and a handle. I recommend only using the blank handle for putting your own shape at the top of the screw part. (see star handle for example) If you do not put something there, the…