1 / 1
Rattle-free/quiet Prusa MMU3 Idler — zdjęcie 1

Rattle-free/quiet Prusa MMU3 Idler

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Added .5mm contact surfaces to the MMU3 idler bearing mounting slots to hold them snugly centered and minimize rattling.

Ocena
5 / 5
Polubienia
148
Pobrania
438
Wydruki
24
Wyświetlenia
3119
Oceny
25

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

Remixed the standard R4 version of the idler to remove rattling sound when idler moves.

Remix of the Ultimulti version here: https://www.printables.com/model/893656/

Print as oriented. This remix adds a .5mm bearing spacer to each wall of the bearing slots which sits against the innner bearing race to prevent the rattle heard otherwise. Not sure why Prusa designed this as such, they have their reasons, but I added these protrusions to secure the bearings which eliminates rattling. This sits against the inner race of the bearing so rotation is not impacted.

The bearing measures 4.96mm wide. The bearing slot is 6mm wide. These spacers reduce the space for the inner race to 5mm.

Use Prusa specified printing parameters:

  • 0.20mm QUALITY
  • Filament: PETG (tested on Prusament)
  • 20% Grid infill

Post your make please if you print/install one. :)

Tagi