Liczymy pasujące modele…
Here is my design of a happy cloud lamp - the cute little light for your toddler! The lamp will cast a shadow of the stars to the ceiling (see pictures). You won't need anything but an LED strip as additional hardware for this lamp, also…
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
This is a simple wall-mounted toilet paper roll holder. It is mounted on the wall with two screws but has also enough surface on the back to glue it to the wall. This holder supports up to three rolls of toilet paper with a diameter of…
Wydruk około 6,87 €–8,40 € nettoWstępna wycena jednego wariantu
Parts for cosy cybex cloud Z
Wydruk około 0,71 €–0,87 € nettoWstępna wycena jednego wariantu
55mm x 40mm or 2.1in x 1.5in (6mm keyhole)
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
TWO SIZES NOW INCLUDED. Drink holder + phone stand + remote holder for any large/wide sectional or couch armrest or back of the couch. The non-remote side is easily narrow enough to go between your sofa and the wall). I know that it fits…
Wydruk około 16,29 €–19,91 € nettoWstępna wycena jednego wariantu
Practical toilet paper holder on the wall. For greater security I recommend holder screwing into the wall. Printer:MK3S+ Material: white PLA
Wydruk około 18,66 €–22,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Do you often have your head in the clouds? Do you need some organization in your life? I've created this desk organizer to declutter your workspace. Find me on Instagram for updates and new projects: https://www.instagram.com/dejennes/
Wydruk około 9,35 €–11,42 € nettoWstępna wycena jednego wariantu
The lamp cover dims and shades the white light of the Ikea UPPLYST cloud lamp. It's designed to snap onto the mounting plate. The LEDs have 1-2cm distance to the cover to prevent it from getting hot. When mounting the lamp to the wall,…
Wydruk około 0,87 €–1,07 € nettoWstępna wycena jednego wariantu
The bridges are now 40mm instead of 140mm which was never a problem for my Prusa i3 or MK4. I normally print them with PETG (Cloud Keys can get very hot) in 0.3 draft mode with 15% InFill and never had any problems.
Wydruk około 2,75 €–3,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A happy cloud to organise your pens and all the stuff on your desk. BIG CLOUD : Print it at 180% to keep your pens in it SMÖLL CLOUD : Print it at 100% to keep all the tiny stuff of your office, such as paper clips, erasers and much more…
Wydruk około 2,35 €–2,87 € nettoWstępna wycena jednego wariantu
I made this D1 Mini Case for my Sensors in the house. I was tired of the blank electronics all over the house, so I made a design that could be screwed to the wall. This has been printed without supports on the Prusa Mini Plus with 0.20…
Wydruk około 1,70 €–2,08 € nettoWstępna wycena jednego wariantu
A mount for the Cloudray Ruida 6442S Panel, to be mounted in front of the Omtech Polar laser cutter. I mounted it with Alien tape, so it has an indent in the back to hide part of the gap. If you plan to use something thinner than 1mm to…
Wydruk około 9,98 €–12,20 € nettoWstępna wycena jednego wariantu
Rounded edge case for the Sofle Pico. I designed this as an alternative to the boring default ‘sandwich plate’ cases. Lets you showcase a colorway with a matching keyplate. The XD keycaps pictured are a non-standard small size, so the…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
My very first model that I made using Womp 3D modeler. Cute little desk accessory.
Wydruk około 2,75 €–3,37 € nettoWstępna wycena jednego wariantu
Wall art, coaster, pendant, keychain: Waterfall in clouds (two colours)
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Wall art: Dragon in the clouds (four colours)
Wydruk około 3,74 €–4,57 € nettoWstępna wycena jednego wariantu
Introducing the smallest and most powerful whistle! Print it out and annoy your friends and neighbors!
My hand cranked turbine blower is cool and works fine - however you have to crank it really fast for a nice blow. So i tried to add another planetary gearbox - and it works so much better (and unfortunately louder). All parts are 3d…
News 2024-03-17: My newest whistle design, a Long Range Dog Whistle at 7,000 Hz . Please download here . News 2024-01-21: I designed an ultrasonic dog whistle with an even higher pitch of 23 kHz , which you can download here . Update…
Cutie Cloud Jumper Dragon Flexi-Fit (Special Articulated) Model With Multiple Choice Of Wing Designs Based on the dragon cloud jumper from the movie ‘how to train your dragon 2’ - Built with articulated links using my self designed…
This is a model of Final Fantasy 7 Cloud Strife in simple polygon form. When I printed it I scaled the model to 15%. Some of the additional files I attached have already been scaled to match that 15%. This also includes: Buster Sword (to…
He may be a baby, but don't be fooled, he's pretty big. This design is easy to print in any material, 100 percent print in place with no assembly - Almost entirely rebuilt from a past design of mine. (Commercial licence is only for…
The bracket of my HyperX Cloud 2 headset broke, so I modeled and printed a new one.
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
He’s definitely going to need supports, and I also recommend scaling him up nice and big before slicing if you want stability and the fine details. Have fun with this, and if you want to see more, give a like and follow me. If you have…
cloud box modular and with optional magnets to lock into position this is a modular design that consists of: base (use of 4mmx2mm magnets optional) main insert · 3 options secondary insert · optional pen holder (use of 4mmx2mm magnets…
The only thing worse that the subscription model, are overpriced accessories that should have been included! I made this for myself, as I will only use it with a 2280. So, if you're are only going to use a 2280 too, have at it. Includes a…
cloud box modular and stackable through magnets check out companion model cloud organiser · modular this is a modular design that consists of the boxes themselves, lid, and as options you have feet and inserts. the stacking between the…
Perfect fit for SKÅDIS mount for Ubiquiti Unifi Cloud Gateway Ultra. Does not block any I/O. Requires 2x Skadis T-Clip System - Low Profile Flush Mount Clips No support needed Printed with PLA with default setting
cloud box · XL modular and stackable through magnets ~assembled dimensions in mm > x: 125 · y: 155 · z: 70 this is a modular design that consists of the boxes themselves, lid, and inserts as options. the stacking between the boxes and lid…
We are excited to introduce the new model for the Xbox Series X! As always, you do not need any support to print both parts. Installation on the console is straightforward and does not affect airflow. All buttons and slots are accessible.…
Based on different existing models Can be printed without supports Uses 4 DIN 7991 M3-16 Screws and 4 M3 nuts
cloud pen holder with optional colour insert dimensions in mm > x: 93 · y: 83 · z: 91 photos show printed in easywood pla by FormFutura 0.20mm layer height 10% adaptive cubic infill notes colour insert is optional for a bit of contrast…
Replace your old cracked PU armrests to with new memory foam Cloud Swap armrests. I used 12mm x 2mm magnets. They are press fit for me, but used some CA glue to keep them in place permenantly. Trim off the tabs on the perimeter used to…
Works great with my other panels :)
A 10" 1U rackmount for the UCG-Ultra with three keystone slots.
This model was originally on Printables where the creator posted his .step file for editing. It's been mixed a few times but as the smaller Max and Ultra Unifi models. This is for the Unifi Cloud Gateway Fibe r unit. It's a wall mount…
This design is a cloud. If you want to make adjustments or make other things out of it, you can certainly do so :)
my original clamps started to break after changing the head cushion. So tried my luck with one from printables the original was pretty good only a bit to loose and I had trouble getting the cable behind the aluminium frame. I made the…
Cloud printed in three parts, joined with a dovetail. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Infill: 10% Filament: EcoPLA by 3DJake PLA Category: Household
Cloud Cookie Cutters - 4 different sizes Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 0.2 Filament: Unknown PLA Category: Kitchen & Dining
UPDATE: after inquiries have i made one that is 5 mm high, for more airflow Wall Mount for ubiquiti unifi Cloud Key Gen2 Plus Print one of each. 5mm hole for screw Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't…
Simple, easy to print cloud. 2D, no supports needed. Just a very simple cloud “icon”. Enjoy!
UPDATE: After a year of use I noticed PLA was not holding up and where the two parts meet it started to sag. You might want to print this in non-PLA or support it with a plain metal rack. Two-piece design that slide locks together (no…
Cloud 6x3 magnet Category: Household
I reuploaded the files, so you no longer have to print each part individually, but can now print several parts simultaneously! Thank 16-year-old me for that conundrum. Use two mid-sections per pole.
STEP files are provided and here's the Onshape link if you want to edit any of the dimensions:…
Wall mount bracket for Ubiquity Cloud Gateway Fiber (ucg-fiber). Gateway snaps into base and is held very tight. Exposes gateways ventilation slots. Slot to assist with removal. If you prefer to have a printed version of the model, please…
Crude Remix to be able to print it in one go on bigger printers. At least a 370x370mm printbed is required. Dont mind the blocks in the preview, they are negatives volumes and will not be printed. Load the project as “Only import…
Use M3 x 12 flat head screws. They will bite and thread into the plastic. The tolerances are tighter than the OEM part, resulting in less side to side movement, and a much stiffer snap when adjusting size.
This model will work for both left and right sides of the headset. You have to replace both the front and the back of the hinge for each side that you want to replace as it will not mate with the existing shell pieces. Also, for the back…
A set of 2 small clay cutters perfect for creating ear rings, pendants or even buttons from polymer clay, ceramic or porcelain. One size (25mm), mirrored. Best printed solid with a 0.4mm nozzle in PLA.
UniFi Cloud Key G2+ runs quite hot especially with large hard drive inside ~ 51 C. I've created a mount case with 120 mm cooling fan. Now the temperature is about 37 - 38 C which is optimal. Print instructions No supports 0.2 mm layers…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Wall mount bracket for Ubiquity Cloud Gateway Max or Ubiquiti Cloud Ultra. Gateway snaps into base and is held very tight. Exposes gateways ventilation slots. Slot to assist with removal. I included another model “key” that can be…
Unifi Cloud Key Gen 2 Plus 1U 10" Rack mount. Printed i PET-G.
The Unifi Cloud Gateway Fiber device does not come with a wall mount option like a lot of Ubiquiti's devices do. So this model allows you to wall-mount your UCG Fiber. It's designed to allow you to place the device in it with the cables…
This bracket is made for 10" racks. They have the standard dimensions of 1U (44.5mm) in height and 250mm in width. With these dimensions the mount can be printed on a print bed with the dimensions of 220mm x 220mm. The mount is designed…
Simple cloud toilet paper holder Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 25 Notes: I recommend at least 25% infill Category: Bathroom
My Unifi Cloud Gateway Max sits on my desk. I noticed the aluminum bottom for heat dissipation gets rather hot. To help the heat dissipate and save space on my desk, created this small little vertical stand. One side of the stand I…
Cloud decoration for use at parties, baby showers, or other events. Doubles as a phone stand that can be given as a party gift or keepsake at the end of the event. STEP file included to be able to modify/emboss text in design. I embossed…
My version ended up a bit tight. Maybe it's because of ASA shrinking. Maybe because of the slight warp. But maybe it's just a bit tight. The screw holes are for M4 screws. I decided to mount the device with it's “top” surface towards the…
Remixed towilab's design to allow for access of the UCG max's SSD port. Made the L-portion of the ‘clip’ on the right side a bit more aggressive while removing the left side one entirely, allowing super secure retention despite only…
Stronger Version of the Cloud Shelves I've seen on here… Can be printed in PLA and not bend under the immense pressure of all you Butt Wipe! Mines been up for a year and still holding the Poopy Paper High! Happy Printing!
group of stl (remixes and originals) to decorate my kids' room all decors can be attached to the wall using hot glue all can be printed using pla and in different materials - we usually use spares ones pls note for grass you can use…
// [UPDATE] July 2025 - Left Shell v2 - Thin wall fix -Minor fix to remove artifacts due to thin walls. There is still a small area around mic connection that has a thin wall, about 1 layer. This fix should allows the print to continue…
Tired of watching your graphics card slowly strain your motherboard? Introducing an adjustable support solution designed to meet your needs, complete with a versatile clip for attaching any design you desire! If you print the AMD logo,…
Prusa Affiliate link: http://www.prusa3d.com/#a_aid=3090 Feel free to check out my website https://www.ar3dprints.com/
Created from scratch to allow me to make my own rack mount. I wanted to leave gaps for the vent holes and potentially the storage bay too. I've taken all the measurements myself on a UCG-Max and while I've made every effort to get them…
Raining cloud printed by Prusa i3 MK3s. When your home plants need to water by naturally way. Print instructions The first step is to glue the two extruded parts together.Put a suitable rod into the side hole on the holder. Then place the…
Larger spacing in the bottom so the device can be mounted screen top / ports bottom. Printed in PETG, holds the device really well.
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
Stitch Marker for knitting. Does not have a slit. Suggested equipment, material, and settings: Nozzle: 0.25 mm Material: PLA Layer height: 0.1 mm Number of perimeters: 2 Printer used for prototyping: Prusa i3 MK3S
i remixed the cloud lamp to have a mount for a TP4056 charging circuit as well as the proper holes in the back panel so this can be battery powered as well as powered from the wall.
There are three supplied mounts. A front version for typical shelf mounting and another that allows inverted mounting which might be useful on a wall or under a shelf. The difference is the location of the window that allows a view of the…
An improved Microphone Version is available here . I basically remodeled every bit except for the metal parts and the stopper plastics for the size adjustments. Also, the aux cable is now detachable, and I skipped the Microphone port as…
Engelsk: Mount for Ubiquiti Cloud Gateway Ultra (Unifi UCG Ultra) This mount is specifically designed to securely hold your Ubiquiti Cloud Gateway Ultra (also known as the Unifi UCG Ultra) in a practical and efficient way. With this…
A VERY LOUD air horn/membranophone that uses a balloon as the diaphragm. A larger version of my small air horn. Great at sporting events, but don't point it at others when you're too close - that would be a good way to "start a…
cloud coin bank lid locks in place with magnets this is a simple design that allows you to easily “throw” coins into the bank with it's angle, and has the top lid locked in place using 4x2mm magnets you'll need 4 4x2mm magnets to achieve…
Small replacement part I designed for my headset. Printed in PLA with 100% infill. Screwing too tightly might crack the piece.
This Holder fits all the brands, large tp and small! I designed it to fit on an average print bet, there are two parts that connect with a Dove Tail joint. It can be on the wall with two options, I left two screw holes OR you can do like…
Cloud shaped coffee tray I designed with 3D Builder. Want it printed? Available in our online store at nordicfox.de Print instructions Use 4 perimeters for a total thickness of 1.67mm. You can scale up to 119% and it will still fit the…
I designed this cloud base to go with the 6-piece rainbow I also designed. The rainbow can be found here: http://www.thingiverse.com/thing:728320 Took about 12H 25M on my Prusa i3, white 1.75mm PLA, 25% infill. Category: Sculptures
please let me know if you have any issues/requests I'm more happy to help you out.
The hinge on this headset tends to be a failure point for many people who like to keep one ear open while wearing the HyperX Cloud IIs. This plastic component keeps the earcup attached to the head strap making the headphones unusable if…
Tower to easier identify spires. Holds lowest chip. Additional chips stack on top. Holder for market items. Ring to slightly lift chip-counters in mats for easier rotation. Half the thickness of the mats.
Let store the toilet paper on the cloud ! Print Settings Printer Brand: TEVO Printer: Tornado Rafts: No Supports: No Resolution: 0,3mm Infill: 15% Filament: No name PLA white Notes: Miminum printing surface needed: 21x21 cm the 3 parts…
Wall mount bracket for Ubiquity Cloud Gateway Ultra. Gateway snaps into base and is held very tight. Printed on MK4 Layer Height: .20 4 Perimeters 15% or 20% infill (grid). I tested successfully with 15% infill. No supports needed Suggest…
No curveballs on print settings for this one. Any layer height should work, but I print in .2mm. This model does require supports for the flanges that hold the UCG down. I use organic supports that I painted on within Prusaslicer. .F3d…
Zum Skript selbst gibt es eigentlich nicht viel zu sagen, außer... es muss nichts mehr im Prusa Start GCode oder End GCode ergänzt werdenzum aufrufen des Skriptes braucht es beide Pfade (Python und Skript) z.B.…
This is a rackmount adapter for Ubiquiti Cloud Key Gen2 Plus. The rackmount adapter is printed in four parts: Cloud Key carriage mount (left mount) Cloud Key rear hook Middle rack piece with keystone jack Right rack piece (no changes from…
A Cute Cloud with a ws2812b 144led strip and WLED that I made for my daughter a while ago It's just 4 pieces that you put on top of each other. No glue or screws needed The backpanel supports a 5v and USB-C port. The USB port is only…
I recommend using 0.16 layer height. Original m3 screws.
This is the WD My Cloud EX2 Ultra fan cover replacement modified for 80mm fan. 70mm version and additional details are avaible here: https://www.printables.com/pl/model/107553-wd-mycloud-ex2-ultra-fan-cover-replacement-noise-r…
Remixed from ‘HyperX Cloud 2 Dongle Holder’ from Thingiverse. I've looked but it seems to have been removed so I can't provide a link. I added the 2 screw holes and made it so that the dongle can put placed in and removed from the holder…
UCG-Fiber stand that raises the device a bit for better airflow.
Nendoroid base that is made for floating figures like the Elaina (from “Wandering Witch: The Journey of Elaina”) one shown in the photo. Recommended Print Settings: 0.1mm layer height Any white filament. Prusament White PETG used in the…
This is my version on a Ubiquiti rack solution, it mounts a 3P USG with the Gen 2 Cloud Key with allowance for a network port on the front, and lastly a Raspberry Pi. Printed in 3 parts and slid together using a dovetail style connection…
This is the WD My Cloud EX2 Ultra fan cover replacement modified for 120mm fan. 70mm version and additional details are avaible here: https://www.printables.com/pl/model/107553-wd-mycloud-ex2-ultra-fan-cover-replacement-noise-r…
