P
Printables
Air quality device cloud enclosure
A nice cloud to put in your child's room to monitor the air quality discreetly (CO2, humidity, temperature,...). To put on the bedside table or hang on the wall. Another variant is available here :…
Search results: loud
Counting matching models…
P
Printables
Loud -speaker, Lautsprecher,
Ich habe mich hier einmal mit Fusion 360 und meinem neuen und ersten 3D Drucker näher befasst. 180 mm hoch und 86 breit. Nahezu Originalmasse des alten Visaton Nano. Löcher für 40er Lautsprecher. (Hate ich noch über. Kein Klangwunder,…
P
Printables
Cloud's Buster Sword Pendant
Cloud's Buster Sword from FFXII. This is my first model. It has a little hole for attaching but be careful it is sharp. This is my first model, please let me know if you have any suggestions. Support helps me keep creating and sharing new…
P
Printables
Ubiquiti Cloud Gateway Fiber wall mount (UCG-Fiber)
Wall mount bracket for Ubiquity Cloud Gateway Fiber (ucg-fiber). Gateway snaps into base and is held very tight. Exposes gateways ventilation slots. Slot to assist with removal. If you prefer to have a printed version of the model, please…
P
Printables
WD My Cloud EX2 Ultra fan cover replacement, noise reduction, 92mm
This is the WD My Cloud EX2 Ultra fan cover replacement modified for 92mm fan. 70mm version and additional details are avaible here: https://www.thingiverse.com/thing:5177184…
P
Printables
GM/Opel Vectra B - Rear Door - Adapter for loudspeakers
GM/Opel Vectra B - Rear Door - Adapter for loudspeakers
P
Printables
Track IR mount for HyperX Cloud headphones
A simple clip-on for Track IR motion reflectors to allow mounting on HyperX Cloud family headphone's bridge. The mount is designed in a way that the metalic clip of Track IR reflectors is slid into the tray from the front (the clip is…
P
Printables
Unifi Cloud Gateway Fiber Wall Mount
The Unifi Cloud Gateway Fiber device does not come with a wall mount option like a lot of Ubiquiti's devices do. So this model allows you to wall-mount your UCG Fiber. It's designed to allow you to place the device in it with the cables…
P
Printables
Unifi Cloud Key Gen2 19-inch rack mount
On request i remixed this mount so it can be used with a Modular/blanks from Mauker. The connector is adapted from Mauker's systems. Parts 3x M5 screws 3x M5 hex nuts happy printing Thx @Mauker @Compman90_234828
P
Printables
Chibi Cloud Strife
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
P
Printables
Chibi Cloud Strife
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
P
Printables
HyperX Cloud 3/III SoundCard Desk mount
This is a custom 3D-printable holder designed for the HyperX Cloud III SoundCard . The mount provides a snug, stable fit that keeps the SoundBox securely positioned while maintaining full access. Its clean, compact form makes it ideal for…
P
Printables
Mini Cloud Dragon
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP Low-poly dragon with soft, cloud-like hair, wings, and…
P
Printables
AC Infinity CloudPlate T5 Shroud
This fan shroud was created to route heat exhaust from an amplifier down and out of the lower air vent in a media rack. This was better than allowing it to pool up at the top of the rack where the PC was mounted. This is designed to adapt…
P
Printables
HyperX Cloud Alpha Mic Pop Filter
Hello, I made this pop filter after the foam cover one covering the microphone of my HyperX Cloud Alpha (Wired) headset gave out. It is the same concept as other pop filters on here that utilizes an open gyroid infill to reduce the speed…
P
Printables
Loudspeaker enclosure for Markaudio Pluvia 7.2 HD
The Markaudio Pluvia 7.2 HD is arguably one of the best 4" full range speakers out there where you can get away without a crossover or notch filter. See one of the reviews . There are multiple suggestions for enclosures on the Markaudio…
P
Printables
Replacement Volume Knob for HyperX Cloud II Wireless
I dropped my headset and broke the volume knob, so I drafted up a replacement. Printed in PLA, it's lasted me for years with no more issues. Disassemble the headset by pulling the pleather rim of the earpiece out from under the plastic…
P
Printables
Sovol SV08 Max 150mm ZZ Tophat - Wham Bam the Cloud holder
This is an addon to the Sovol SV08 Max 150mm ZZ Tophat Replacing a corner with a version that has a Wham Bam the Clound holder. This model do not use or need any inserts, all holes are printed slightly smaller to allow threded screws to…
P
Printables
Loud Safety Keychain Whistle
My daughter asked me if I could print her some whistle for her and her friends. This is a nice model from ThreeLIttleBirds 3D. I printed them on my Prusa XL, Core one, and old MK3 successfully Things I used: orange PETG (…
P
Printables
Cloud Goliath Giantess Ranger - DnD mini
Cloud Giantess Ranger (without weapons) - it's an easy to print and fast model for a TTRPG mini. Should work pretty well on 0,4 and 0,2 nozzle with some tinkering. I leave it at it's original size so you will have to scale it down once…
P
Printables
Cloud Tags Key Tag
A smol key tag where you can stick a cloud tag or Tile label sticker on so anyone who scans it can find your contact info and return the thing you've lost. You can also use it to keep track of what the key is for.
P
Printables
Kid Goku on the nimbus cloud
Design Concept The model features a playful depiction of Kid Goku riding the iconic Nimbus cloud from Dragon Ball. The design captures the adventurous and energetic nature of the character, making it a cherished collectible for fans.…
P
Printables
Whistle (use screw driver to break the ball inside) super loud
Do not use Support on a slicer app (e.g. Cura) otherwise the inside would be filled with plastic filament (won't work).
P
Printables
"SkyPot" - Cute Cloud Planter & Desk Organizer
☁ The Honest Shelf Vol. 41 // SkyPot ☁ Bring a piece of the sky to your home with these friendly cloud companions! ✨ TIP: I personally love printing these with the "Fuzzy Skin" option enabled in the slicer! It gives the clouds a soft,…
P
Printables
Sputnik 17: Dodecahedron loudspeakers
Dodecahedron loudspeakers radiate sound in all directions. They also look really cool. This project uses a parametric program that allows anyone to create a dodecahedron loudspeaker using any size speaker. We chose three-inch speakers…
P
Printables
Cloud money box, piggybank, piggy bank
An easy-to-print cloud-shaped piggy bank. Three elements: a central one and two (mirror-like) side elements. Just glue it. You can easily add text or graphics.
P
Printables
Minnesota Flag 4mm Loud Dual-tone Flat Whistle (Optimized)
An efficient Minnesota Flag remix of the 4mm "beta" loud flat dual-tone whistle by Jonas Daehnert. Only 12 color swaps for a double-sided flag. Jonas' 4mm beta whistle is hands-down the best resistance whistle we've tested so far, and had…
P
Printables
CLOUDIE - toothbrush holder and decorative large oval box with hinged lid
Decorative set to your bathroom: toothbrush and toothpaste holder or pen holder / organizer (diameter 8 cm, high 9,2 cm) large oval organizer / box with hinged lid (body and lid is printed separately and then completed with a snap) (20 x…
P
Printables
Martyna Name Cloud Pendant - Support Free
A unique, personalized pendant featuring the name "Martyna" set against a fluffy cloud backdrop. This model is designed for easy 3D printing without the need for supports or bridges, ensuring a clean finish directly from the heatbed.…
P
Printables
Multiboard Unifi Cloud Gateway Mount
This is a holder for the Unifi Cloud Gateway for Multiboard. It is attached to the wall using two Small Thread Fix Points with the following Flush Snap Small Thread Holes. It is best to use Longer Small Thread Fix Points. It can be…
P
Printables
Storm Cloud with Lightning Strike – Fantasy Weather
Capture raw atmospheric power with this Storm Cloud with Lightning Strike , a dynamic weather-effect model designed to bring energy and drama to your displays. A dense, swirling cloud mass hovers above a jagged lightning bolt that crashes…
P
Printables
Kagurabachi - Cloud Gouger Tsuba
Tsuba for Cloud Gouger from Kagurabachi! Tsuba file, designed for a real blade - 7mm thick blade Tsuba file, split in half for flatter printing Cosplay tsuba file, split in half for flatter printing. Designed for a wider prop blade A…
P
Printables
Blue Cloud Sword Maiden
If you downloaded the model, it means you are interested in it. Don't forget to like it, please!
P
Printables
Kagurabachi Keychain - Cloud Gouger Tsuba
Keychain version of Cloud Gouger's tsuba from Kagurabachi! Included are 2 different keychain designs - one horizontal and one vertical. Both versions have versions that are split in half for flatter printing. Files are available as OBJ…
P
Printables
Google Cloud - Cloud Digital Leader
This project allows you to print a complete “Cloud Digital Leader” badge with a separate multicolor Google Cloud logo for the best visual result. To simplify printing and respect the 4-color AMS limit, the design is divided into two…
P
Printables
Unifi Cloud Key Gen2+ Cooler Fan
My Unifi Cloud Key Gen2+ runs hot.. with POE Power, my CPU and the SSD was seeing temps over 50C. Its warm here in Australia ! I have been having problems with the SSD disconnecting.. lets see if its a thermal issue. So I made a duct that…
P
Printables
HexHoot (Blank) - 90dB Loud Noise Maker (by Hydrotatic)
A modified version of @Hydrotatic CC-BY-NC-SA work without the year on the side, allowing for customization. This can be done in CAD software or a Slicer. If you are adding text in a slicer the "Use Surface" and "Per glyph" are useful to…
P
Printables
Cloud Shaped Shelf Bracket, Floating Shelf Support, Nursery Decor, - 3D Printable STL File
Clean up your setup with this perfectly-fitted Cloud Shaped Shelf Bracket, Floating Shelf Support, Nursery Decor, Whimsical Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
P
Printables
Louder-ESP32 speaker enclosure (larger)
This is a modified, larger version of @Manuelous 's great parametric speaker box model to accommodate larger speakers. Additionally, there is an optional LED mount at the top of the box, as well as other minor adjustments to make for…
P
Printables
Akatsuki Cloud NFC Keychain
"Even Pain couldn't find your WiFi password here..." Step into the world of stealth and technology with this Akatsuki Cloud NFC Keychain ! Inspired by the iconic symbol from Naruto Shippuden, this isn't just another decorative keychain –…
P
Printables
Eargesplitten Loudenboomer
This should be a nearly 1:1 replica of the original, great for desk toys. Recommend printing at .2 or lower resolution.
P
Printables
Large *LOUD* Air Horn / Membranophone
A VERY LOUD air horn/membranophone that uses a balloon as the diaphragm. A larger version of my small air horn. Great at sporting events, but don't point it at others when you're too close - that would be a good way to "start a…
P
Printables
HyperX Cloud Flight S Side Button Cover Replacement (With / Without Logo)
Replacement side button cover for the HyperX Cloud Flight S Wireless Headset. Minor adjustments may be needed. Note : It is recommended to print this part in ABS, as the Qi wireless charging area can get quite warm during use. Creality…
P
Printables
Shock absorber for Cloud-9 saddle
I lost one of the squishy shock absorbers that came with my Cloud-9 bike saddle, so I printed two replacements in 95A TPU. I used 4 top/bottom layers, 2 walls of 0.68 mm each, and 15% cubic infill, but you can adjust this for the feel you…
P
Printables
Full range loudspeaker Dayton Audio RS100-4
This is a full range speaker for the Dayton Audio RS100-4 chassis from their reference range, popular due to low distortion and linearity. Sound pressure level is in the lower range with 83dBA, but the Re of 4 Ohm makes it easier for the…
P
Printables
UniFi CloudKey Gen2 with Keystone 19" rack mount with retention clips
This prints best in the orientation already given in the .m3f file: Face down, with supports on the clips, arches and screw holes. On the U1, a brim is recommended, as these long models have a tendency to peel off the build plate…
P
Printables
PlayMat Tube Asian Cloud
A 3D-printed playmat tube that can contain/hold any normal TCG playmat. The example picture above contains a basic MTG playmat and could be adjusted to fit any other playmats. If attempting to store a larger playmat, just scale the…
P
Printables
Akatsuki cloud charm
A little charm modeled after the akatsuki cloud logo from the anime Naruto/ Naruto Shippuden printed with generic red pla at .16mm and 15% infill, brim and supports
P
Printables
Cloudspire Inlay for all expansions (2026) with all gameplay content
Cloudspire Inlay that holds all expansions (2026) with all gameplay content. Can store many rulebooks/scenarios but not all so you have to store the ones you currently not play somewhere else. Also the box for the fortress upgrade sticks…
P
Printables
10" rack mount Ubiquiti Cloud Gateway Ultra/Max
10" rack tray for the Ubiquiti Cloud Gateway Ultra/Max gateways. Model is split in 3 parts (tray, left- & right mount) to be printable on smaller print-beds. The left mount also contains a slot for a Keystone jack. The mountings are…
P
Printables
V29.1 improved whistle - significantly louder, angry version
Since i was a little bit disappointet of the relatively low noise level of the original V29 whistle, i had to improve it. This whistle has larger cavities and therefore a lower pitch. The interval between the two tones is larger and more…
P
Printables
Loud mini whistle
This whistle is very loud if you blow it right. You may want to scale it up a bit, because it is hard to keep your lip from covering the hole since the whistle is so small. It needs no supports. Enjoy!!
P
Printables
Cloudray F-Theta fiber laser lens cover holder
I made an enclosure for my fiber laser and I have changed all of my lenses to the Cloudray F-Theta lenses. I wanted a way to keep the lens cover handy, so I modeled a simple holder for them. I mounted this to the front of the enclosure,…
P
Printables
Old Man Yells At Cloud He Is Tired Of Shadow IT
Old Man Yells At Cloud He Is Tired Of Shadow IT
P
Printables
Old Man Yells At Cloud He Is Looking For The Redundant Power
Old Man Yells At Cloud He Is Looking For The Redundant Power
P
Printables
Cloud Kamifuda Holder – Rental-Friendly Wall Mount for Japanese Ofuda
A minimalist, cloud-shaped holder for Japanese kamifuda (ofuda) shrine talismans. Designed specifically for renters — it mounts to the wall using a standard stapler opened to 180° (tacker mode), so no drilling, nails, or adhesive tape are…
P
Printables
the whistle - 1g loud dual note keychain
simple, but loud two tone keychain. due to about 4kHz + 4,75kHz combination extremly noticable and loud. no supports needed. prints ~3 minutes, and uses ~1g of filament. (i achieved ideally 1g with 10% infill and ASA) Print as many as you…
P
Printables
Louder ESP32 Rev H6
This case will support the newest version of the Louder ESP32 music player from Sonocotta. The newest version of the player has connection headers for the W5500 Ethernet module as well as the OLED display. The lid has cutouts for both of…
P
Printables
Berserk Earcup Covers for HyperX Cloud III
Berserk-Inspired Earcup Covers for HyperX Cloud III Wireless A pair of 5×2mm disc magnets (5mm diameter, 2mm thick) are required for assembly. Im note sure how well the singular colour stls work, i wasnt able to test them but it should be…
P
Printables
1U 10" Server Rack Mount for Ubiquiti Unifi Cloud Key gen2+
A 1U mounting bracket for a Unifi Cloud Key gen2+ in a 10" mini server rack. The model includes a backing plate to hold the UCK, it's not needed unless you plan on moving around the server rack a lot. Materials & Print Settings The model…
P
Printables
Cloud shaped wall light
A simple wall mounted light. It illuminate the wall behind it. There 2 simples pieces, the cloud shape and the wall mount. Both fit together without screw. I fixed it with double side tape. I used a cheap RGB Ambient Light bought from…
P
Printables
UCG Fiber (Unifi Cloud Gateway Fiber) 10 inch Rackfinity mount Prusa Mini compatible
A Rackfinity compatible holder for the Unifi Cloud Gateway Fiber. With an optional external 40mm fan for cooling. Can be fully printed on a Prusa Mini or other 180mm^3 printer. For details on how to fit the prints on small pinters, see…
P
Printables
FDMDuo Bluetooth Loudspeaker by Deposition Sound LLC
Built on the foundation of the FDM4, the FDMDuos deliver stronger low-end performance with enhanced output below 100 Hz. If you like a little junk in the trunk, these bad boys are for you. They still carry the top end sparkle of the…
P
Printables
Cloud Surfer 2000mm RC Glider Wheel Mount
The Hobby King Cloud Surfer RC Glider is "lightly constructed". It has soft foam and some weak designs. Consequently, after a few landing, the center landing wheel collapses into the fuselage and no longer works. This design replaces the…
P
Printables
Porsche Boxster 987 distance ring for HELIX Ci3 M100 mid range loudspeaker
The HELIX Ci3 M100 loudspeakers fit into the door of the Porsche 987. However the chassis has mounting positions, that can be mounted in two directions. In the original position, the loudspeakers sit on the screw holes only - the chassis…
P
Printables
Western Digital (WD) My Cloud EX2 feet
Feets for the Western Digital (WD) My Cloud EX2 Network Attached System. My original rubber feet got lost over time and they are very important for the cooling of the device by allowing air flow from the bottom to the top. Therefore I…
P
Printables
Loud and compact Whistle for your Keychain
News 2024-03-17: My newest whistle design, a Long Range Dog Whistle at 7,000 Hz . Please download here . News 2024-01-21: I designed an ultrasonic dog whistle with an even higher pitch of 23 kHz , which you can download here . Update…
P
Printables
Loudest Emergency Whistle
News 2024-03-17: My newest whistle design, a Long Range Dog Whistle at 7,000 Hz . Please download here . News 2024-01-21: I designed an ultrasonic dog whistle with an even higher pitch of 23 kHz , which you can download here . Update…
P
Printables
WD My Cloud EX2 Ultra fan cover replacement, noise reduction, 120mm
This is the WD My Cloud EX2 Ultra fan cover replacement modified for 120mm fan. 70mm version and additional details are avaible here: https://www.printables.com/pl/model/107553-wd-mycloud-ex2-ultra-fan-cover-replacement-noise-r…
P
Printables
Cloud Photoholder / Photostand compatible with Instax, Polaroids and Photos
This stand ist for instax mini, polaroids and photos. You can also combine images with this stand.
P
Printables
Loud and slim whistle
So i created my own whistle because i couldn't find a slim but no too small, powerfull and strong whistle. Feel free to suggest a modification! Print Settings Printer Brand: Anycubic Printer: Kobra 2 Rafts: Doesn't Matter Supports: No…
P
Printables
LOUD Duck Call
LOUD duck call. 60db will attract ducks from far away. Don't pay over 100$ for a call. Minimal sanding. Tight fit and compact pocket size. Good for any and all ages.
P
Printables
Cloud dice tower pls like
A little castle on a cloud with lightning to hold it up. it needs supports to hold it up and it might fall.
P
Printables
Unifi Switch 8 and Cloudkey Mount
10" rack mount for Unifi Switch 8 plus CloudKey Gen2. Two versions: Port light reflector version (pictured) Lit port number version (untested, but should work fine)
P
Printables
Unifi Cloud Gateway Ultra - SKÅDIS
Perfect fit for SKÅDIS mount for Ubiquiti Unifi Cloud Gateway Ultra. Does not block any I/O. Requires 2x Skadis T-Clip System - Low Profile Flush Mount Clips No support needed Printed with PLA with default setting
P
Printables
Unifi CloudKey Gen2 Plus Stand
A quick and easy stand for the CloudKey Gen2 Plus. UniFi sells these but save space and $$ and print your own. It also runs cooler. I printed this in PLA, no need for anything exotic.
P
Printables
K40 CloudRay Mirror 1 Adapter Plate
Adapter plate for my K40's original mirror mounting holes and the CloudRay laser head and mirror kit ( https://www.amazon.com/dp/B07NXQ7SVK )
P
Printables
K40 CloudRay SightMark 40S&W Boresight Adapter
I made this so to help with K40 mirror alignement with a Sightmark 40S&W laser boresight (https://www.amazon.com/Sightmark-380-ACP-Pistol-Boresight/dp/B001C3Q9BI ) with the Cloudray Laser Head ( https://www.amazon.com/dp/B07NXQ7SVK ).
P
Printables
K40 CloudRay Mirror Alignment/Centering Tool
Easily use paper targets to align mirros on Cloudray laser head and mirror assembly ( https://www.amazon.com/dp/B07NXQ7SVK ). It's made in two parts that sandwich the paper inbetween, this allows for accurate centering of the paper target…
P
Printables
Loud Emergency Whistle (Over 115dB!)
About Camping can be very fun, but getting lost isn't. That's why many websites say that you should definitely bring a whistle to any camping or other nature trips in case you ever do get lost. However this is easy to forget and finding a…
P
Printables
Loudener for Airsoft (14mm ccw) and Airguns (1/2-20 UNF) - Tractrix Horn Attachment
Another take on the Loudener design from the Simpsons. Print upside down without supports. Scale if the threads are too loose or tight. The design is based on the tractrix profile to better direct and amplify the pew pew sounds. The…
P
Printables
Ubiquiti Cloud Gateway Max M.2 Caddy
This is an M2 drive caddy for the for the Ubiquiti Cloud Gateway Max (UCG Max NS) with no storage built in. I printed this in ABS with 100% infill, just to have something for the screw to bite in to. I used a random pc screw i had lying…
P
Printables
Cloud Grip Fader
This is a model inspired by clouds. I think it has a comfortable grip for your finger to rest on. The measurements are: 25x12x10mm
P
Printables
Cloud tray
Small cloud-shaped tray I made to store small items like pacifiers in the nursery. Easy and fast to print. Fits on a Prusa Mini bed. Bottom area is ~7300 mm^2. My first attempt at using Fusion 360.
P
Printables
Cute cloud shelf
I designed this adorable cloud shelf, and my girlfriend is obsessed with it! It attaches to the wall with a hidden cleat (which prints separately), making installation a breeze. It prints with the cloud against the print bed, so there's a…
P
Printables
Fast and Loud DiceTower modded
Added funnel on top for easier dice throw. Made slighty larger.
P
Printables
Unifi CloudKey Gen2+ wall mount
OnShape model: https://cad.onshape.com/documents/e575f295105d8e9e32a6bc56/w/313938088c26a895e167df17/e/4262aab72ff56fb5d56f9058
P
Printables
Raspberry NAS Cloud case noiseless
A nice cloud-shaped enclosure for a Raspberry Pi 3 or 4 based DIY NAS which contains two M.2 SSD slots (i used https://www.amazon.de/gp/product/B075GVFCL8/ref=ppx\_yo\_dt\_b\_asin\_title\_o01\_s00?ie=UTF8&psc=1 ). The case offers also…
P
Printables
Witty Cloud module enclosure box
Enclosure for the ESP8266-based Witty Cloud module. Hole for USB to power device, a hole on tha back to hang the box on a screw and holes for the light sensor and RGB LED. You might want to add the plastic opal lenses to make it neat.…