1 / 8
Prattle Pins from keeper of the lost cities.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are some fun little prattle pins I made!
- Ocena
- 4 / 5
- Polubienia
- 8
- Pobrania
- 102
- Wydruki
- 1
- Wyświetlenia
- 588
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution
These are some prattle pins from the book series Keeper of the Lost Cites. I got the photos that I turned into relief sculpture here.
Powered by Relief Sculpture Maker from MakerWorld (https://makerworld.com/makerlab/
reliefSculptureMakerV2)
Print Instructions:
Flareadon, Sasquatch, etc.:
Brim: Yes.
Supports: Yes.
Layer height: 0.2.
Nozzle size: 0.4.
Orientation:

Pins:
Brim: Yes.
Supports: No.
Layer height: 0.2.
Nozzle size: 0.4.
Orientation: As loaded in slicer.
Non-Printed Parts
1 1/16 in safety pins.
Assembly
Insert the safety pin into the slot, than put the pins in and glue or plastic weld the pins in.