Liczymy pasujące modele…
Keep your loose cables tidy. Slicing Tips: Try to orient the main part so the first layer of bridging is as short a distance as possible. Orient the cable wrap part so there is no need for bridging. Other Sizes: Cable Keeper Medium:…
The original Cable Keeper, but TWICE THE SIZE! Keep your extra long loose cables tidy. Slicing Tips: Try to orient the main part so the first layer of bridging is as short a distance as possible. Orient the cable wrap part so there is no…
A lid to keep your bar keepers friend in its container. Print it top side down, no supports. It's not quite a press fit because popping it off with force gets the stuff in the air and you probably wouldn't enjoy inhaling it. Knurls to be…
The original Cable Keeper, but 1.5x larger! Keep your longer loose cables tidy. Slicing Tips: Try to orient the main part so the first layer of bridging is as short as possible. Orient the cable wrap part so there is no need for bridging.…
A simple latching lid for barkeepers friend. The lid will snap over the container and the latch will catch on the lower lip. Printed in PLA with a .2mm layer height and 100% infill (the only space for infill is in the sidewall so it…
Since I had some trouble with my original Apple cables being incredibly fragile when bent too much, I decided to remix this. I rounded the corners to hopefully limit the stress that's put on the cables. Prints without supports. The…
Just snap the lid onto the top of the container. Use TPU filament to print. It helps keeps the powder dry and in the can, not trapped between the top of the can and the lid.
JCreateNZ --- I bought Bar Keeper's Friend but it didn't come with a lid, so I made one. Should fit both Barkeeper's friend cleanser and cookware cleaner & polish. If your printer is accurate it will snap on for a tight fit and seal (but…
A Simple box for your detecting finds . Fits snugly under the arm cuff of the Nokta Simplex+ Metal Detector. (See picture) Print Settings Printer: Ender 3 v2 Rafts: No Supports: Doesn't Matter Resolution: .2 Infill: 20% Filament: YOUSU…
My FC Bayern jersey models - covering all players, goalkeepers, and the coach - are printed with planned color changes to capture the club’s iconic look. Printing starts with white (2 mm), followed by red (1 mm), and finishes with white…
This is a remix of TotallyRidiculous 's fantastic cable organizer in order to fit an Apple Watch charging cable, visit his original model for the wrap. https://www.printables.com/model/520851-cable-keepers/files
A simple cap for Bar Keepers friend that prevents spills
For those who hot-melt chain wax. This is a series of parts to make a simple chain break-in device to help loosen up the stiff links of a chain after it has been waxed. Wholly inspired by @dac_201215 ( who made this ), a design that was…
Here is a simple little insert for Dragonkeepers. Trays to store all the amulets in order. Box for expansion/promo or without. Sleeved cards box, though I haven't tested it myself. Print one of each file, only one card tray--choose…
Tired of purchasing half of the front suspension when you lose one of those fiddly clips on the MA-020 Mini-Z? Print a permanent replacement and use a couple spare screws to keep them in place.
I really appreciate you if you can consider a coffee for me if you like the design! ------- Lid snaps perfectly with Bar Keepers Friend. The lid has the inner depth to hold the seal to avoid powder comes out from the top when the can…
Simple lid to keep a can of Bar Keepers Friend from getting too much moisture in it. The inner lip provides a better hold and helps seal out moisture, but is easy to remove. I like it printed in a flexible material, but works great with…
Tight fitting lid/cap for Bar Keepers Friend. Requires a little bit of effort to remove the lid/cap. Good for if you need to transport BKF. Picture printed at 0.08mm, approx 1 hour print time.
This minimalist bee was designed as a simple, two-dimensional 3D-printable wall decoration. Its clean outline and simple design make it a beautiful decorative piece for the home, workshop, apiary or beekeeper's room. The bee is meant to…
A sugar shaker filter for beekeepers to test for Varroa mites. 68mm in diameter to fit a 70mm mason jar lid.
I used to buy the smaller containers of Bar Keepers Friend, but I found that the larger, 21 oz container was more economical. However, I found that because I used it so sparingly, the container lasts a very long time. Sadly, over the…
Gear keepers, press fit. Use the stoppers_large.stl (x2) for the large gears and the stoppers_small.stl (x1) for the small gear. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.15 Infill: 20%…
Worked on this throughout the years – the design has evolved a bit. Rev 6 As of 2023-10-14, latest rev is rev 6. Compatible with 31.8 mm seat tubes. Hardware M4 x 16 CSK screw M4 nut, ordinary if I have problems with the joint loosening…
This is a lid to keep out moisture from Barkeepers Friend powder. The powder does not come with any way to protect the powder from clumping or getting moisture inside. This lid is to protect your purchase from that. As with the original…
Print in PetG to make it slightly flexible. It has a lip to keep it securely attached that prints without supports. The tab helps you peel it on and off easily without risking flicking the powder anywhere Onshape file here for remixing…
Deutsch (Drachenhüter) Dieser passgenaue Einsatz für die Spieleschachtel von Drachenhüter sorgt für Ordnung und einen schnellen Spielaufbau. Das Set besteht aus zwei Elementen: Amulett-Halter: Speziell geformt für die gebogenen…
I hate when straps flop around on backpacks. What more needs to be said? There are models for straps with the following widths and depths: 25mm x 2mm 20mm x 1.5mm If you need a different size, let me know the dimensions of your straps and…
Parallel Keepers, stop your parallel from fall over in you vices used on a milling machine. Print four keepers, press in one magnet in to each. Magnets are round .375 in diameter X .125 thick. Feel free to modify in any way you feel fit.…
Through a series of stupid events, I managed to accidentally remove the metal lid from my Bar Keeper's Friend cleansing powder. I designed this to fix the problem.
Organize your DragonKeepers/Drakenherders/Drachenhüter amulets during your gameplay with this holder. It consists of two parts to enable storage in the original box, without the need to remove the cardboard inserts. Each slot is numbered…
Whether you’re jotting down garden notes, labeling seedlings, or just looking to tidy up your tools, GrowKeepers are here to bring order with earthy charm. This set of two containers is designed with gardeners in mind but fits just as…
WRMKs Word Punch Board storage tray for the Alphabet. I have included a blank spacer to add to the tray to stop the letters moving around. You can use the spacer to leave the correct spaces between words, then remove before inserting…
A top for the storage tray here:
This is a replacement latch for snap shut lid on Presidents Choice Produce Keepers containers. Print Settings: 0.4 nozzle 4 walls 20% infill Supports from build plate only Printed in ABS or PETG is recommended Prints in about 30 minutes.…
Keep your hive clean with this durable 3D Printed Beehive Scraper, designed to make hive maintenance faster and easier. The pointed scraper teeth help remove wax, propolis, and other buildup from hive components, while the comfortable…
The "Tree of Knowledge"-Pendant from the Eurofurence Pawpet-Show "Keepers of the Light". Category: Coins & Badges
Just snap the lid onto the top of the container. Use TPU filament to print. It helps keeps the powder dry and in the can, not trapped between the top of the can and the lid.
I hate when straps flop around on backpacks. What more needs to be said? There are models for straps with the following widths and depths: 25mm x 2mm 20mm x 1.5mm If you need a different size, let me know the dimensions of your straps and…
Deutsch (Drachenhüter) Dieser passgenaue Einsatz für die Spieleschachtel von Drachenhüter sorgt für Ordnung und einen schnellen Spielaufbau. Das Set besteht aus zwei Elementen: Amulett-Halter: Speziell geformt für die gebogenen…
I really appreciate you if you can consider a coffee for me if you like the design! ------- Lid snaps perfectly with Bar Keepers Friend. The lid has the inner depth to hold the seal to avoid powder comes out from the top when the can…
Just some coasters to place under the feet of your table to save your carpet, also can be used under chairs etc. you get the use. Place the spikes in the carpet.
Caps to keep your battery in your strap! TPU, 2 perimeters, 15% fill Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: PolyMaker TPU Category: R/C Vehicles
A lid for the 21oz container Bar Keeper's friend comes in. I printed in PETG This 3D‑printed design is provided for personal use and educational purposes only. All files and instructions are offered as‑is with no guarantees of accuracy,…
Do your Sharpies grow legs and walk off? Do you find yourself ready to mark your work but with no marker in reach? Not anymore when you print one of these keepers! Just pick out your size, print it out (15-20mins, tops!), slip it onto the…
My trusty BKF was taking up space on my kitchen counter so I designed a 2-piece, french cleat-inspired wall mount. The nice thing about this setup is you can just design your own holder for whatever and slide it into the cleat bracket.…
Every stinking time I pulled solder from the spool on my iron stand, the roll of solder flew across the room. Got tired of it this weekend. This stand came with my X-TRONIC 6040-XTS soldering station, though I've seen the same stand…
Inspired by Dennis Samson's product sold at Electric Dreams, modeled and shared with his permission, this simple print helps you avoid damaging mis-connections of your alligator clips to three post slot car controller connections that are…
My wife wanted a holder/organizer for her We R Memorykeepers fuser. Printed in Prusa PLA.
Card Game Keeper decks for Movement, Withering Gaze/Look and Magic Tome decks.
Simple snap on lid for your barkeeper's friend container. This also has an extrusion to help keep the agent inside the container. Seriously, why does it have an adhesive sealer? Print settings: print on largest face 0.2mm layer height no…
