1 / 8
Prattle Pins from keeper of the lost cities.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are some fun little prattle pins I made!
- Rating
- 4 / 5
- Likes
- 8
- Downloads
- 102
- Makes
- 1
- Views
- 588
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Cosplay & Costumes in general
- License
- Creative Commons — Attribution
These are some prattle pins from the book series Keeper of the Lost Cites. I got the photos that I turned into relief sculpture here.
Powered by Relief Sculpture Maker from MakerWorld (https://makerworld.com/makerlab/
reliefSculptureMakerV2)
Print Instructions:
Flareadon, Sasquatch, etc.:
Brim: Yes.
Supports: Yes.
Layer height: 0.2.
Nozzle size: 0.4.
Orientation:

Pins:
Brim: Yes.
Supports: No.
Layer height: 0.2.
Nozzle size: 0.4.
Orientation: As loaded in slicer.
Non-Printed Parts
1 1/16 in safety pins.
Assembly
Insert the safety pin into the slot, than put the pins in and glue or plastic weld the pins in.