Ender 3 PSU Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mounting bracket to mount the Ender 3 PSU to the linear rail in its original orientation.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 248
- Wydruki
- 3
- Wyświetlenia
- 1821
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
A mounting bracket to mount the Ender 3 PSU to the linear rail in its original orientation.
I made this because I installed a dual Z axis but I couldn't find any PSU mounts that keep the PSU in it's original orientation, rest on the linear rail, and have the screw holes in the same spot as mine. Some Ender 3's have different version PSU's with screw holes in different positions, mine is model P360W24V.
Requires two m4 x 8 mm screws(or a little longer). There are two tabs on the bottom of the mount that slide into the linear rail.
Created with Onshape.